Sadolin Stainable Woodfiller - 350ml

Sadolin Stainable Woodfiller - 350ml

$17.40
Sale price  $17.40 Regular price  $22.03
Skip to product information
Sadolin Stainable Woodfiller - 350ml

Sadolin Stainable Woodfiller - 350ml

$17.40
Sale price  $17.40 Regular price  $22.03

Overview

Sadolin Stainable Woodfiller is an easy-to-use two-pack woodfiller that has been specially formulated for use with woodstains. This fast-drying product offers the perfect match to your woodstain giving you a flawless finish for both interior and exterior projects. Ideal for use with Sadolin topcoats it can be over-coated with most types of interior and exterior timber coating systems including paints, woodstains and varnishes.

  • Fast drying
  • Workable as wood when cured
  • Stainable - perfect match to woodstain
  • Easy to mix
Area Interior & Exterior
Recommended Use Exterior and interior soft and hardwoods
Drying Time Sandable 15 minutes
Re-Coat Time 30 Minutes
Recommended Coats 1 Coat
Application Method Filling Knife

Preparation

Always ensure the surface to be painted is clean, dry, and free from any contaminates which may affect adhesion.

  • Remove any wood stain or varnish from the area to be filled.
  • Remove any loose or decaying wood, after cutting back, treat the area to be repaired with a Sadolin Quick Dry Wood Preserver.
  • When filling large areas consideration should be given to splicing in new timber sections.

Application

Always carry out a test application, to ensure you are happy with the finished results.

  • Combine the filler and hardener by placing the filler about the size of a golf ball onto a suitable clean, non-porous board, then squeeze about 3.5cm of the hardener from the tube and mix with the filler.
  • Ensure the two components are thoroughly mixed together to ensure you achieve a consistent colour.
  • Once mixed the filler is workable for 5 minutes, times may vary depending on the temperature.
  • Apply with a plastic spatular, filling knife, or similar implement.
  • Apply the filler carefully to ensure all air is displaced and good contact is made between the filler and the timber.
  • For deeper fills it may be necessary to build up the product in layers.
  • Excess filler should be removed after the initial 5 minute curing period using a sharp chisel.
  • Filler can be sanded after 15 minutes, carefully sand the filler flush to the timber surface using a medium-grade abrasive paper.
  • A topcoat may be applied after 30 minutes of drying.

Always follow the manufacturer's instructions found on the container.

Aftercare & Storage

Ensure this pack is stored upright and secure at all times, do not store below 5°C or above 40°C.

You may also like