Sadolin Stainable Woodfiller - 350ml
Overview
Sadolin Stainable Woodfiller is an easy-to-use two-pack woodfiller that has been specially formulated for use with woodstains. This fast-drying product offers the perfect match to your woodstain giving you a flawless finish for both interior and exterior projects. Ideal for use with Sadolin topcoats it can be over-coated with most types of interior and exterior timber coating systems including paints, woodstains and varnishes.
- Fast drying
- Workable as wood when cured
- Stainable - perfect match to woodstain
- Easy to mix
| Area | Interior & Exterior |
| Recommended Use | Exterior and interior soft and hardwoods |
| Drying Time | Sandable 15 minutes |
| Re-Coat Time | 30 Minutes |
| Recommended Coats | 1 Coat |
| Application Method | Filling Knife |
Preparation
Always ensure the surface to be painted is clean, dry, and free from any contaminates which may affect adhesion.
- Remove any wood stain or varnish from the area to be filled.
- Remove any loose or decaying wood, after cutting back, treat the area to be repaired with a Sadolin Quick Dry Wood Preserver.
- When filling large areas consideration should be given to splicing in new timber sections.
Application
Always carry out a test application, to ensure you are happy with the finished results.
- Combine the filler and hardener by placing the filler about the size of a golf ball onto a suitable clean, non-porous board, then squeeze about 3.5cm of the hardener from the tube and mix with the filler.
- Ensure the two components are thoroughly mixed together to ensure you achieve a consistent colour.
- Once mixed the filler is workable for 5 minutes, times may vary depending on the temperature.
- Apply with a plastic spatular, filling knife, or similar implement.
- Apply the filler carefully to ensure all air is displaced and good contact is made between the filler and the timber.
- For deeper fills it may be necessary to build up the product in layers.
- Excess filler should be removed after the initial 5 minute curing period using a sharp chisel.
- Filler can be sanded after 15 minutes, carefully sand the filler flush to the timber surface using a medium-grade abrasive paper.
- A topcoat may be applied after 30 minutes of drying.
Always follow the manufacturer's instructions found on the container.