Overview

Rustins Red Oxide Primer is a high-performance, anti-corrosive primer designed for both bare and galvanised metal surfaces. Ideal as an undercoat for gates, tanks, railings, and all ferrous metals, it provides exceptional protection and a durable base for topcoats. Its quick-drying formula, enriched with micronised red oxide pigment, ensures excellent opacity, strong exterior durability, and a smooth, even finish.

• Exceptional coverage for all metal surfaces
• Quick-drying for fast project completion
• Anti-corrosive formula protects against rust and corrosion
• Ideal as an undercoat for exterior and interior ferrous metals

Preparation

Ensure all bare metal surfaces are clean, smooth, and free from grease, dust, or other contaminants.

• Strip any old paint or varnish using Rustins Strypit Paint and Varnish Stripper. Follow the manufacturer’s instructions carefully and ensure the surface is thoroughly cleaned afterward.
• Remove loose or flaking rust with a wire brush or abrasive pad.
• Apply Rustins Rust Remover to affected areas to neutralize remaining rust and prepare the metal for priming.

Final Check: Ensure the surface is completely clean, dry, and smooth before applying Rustins Red Oxide Primer. Proper preparation ensures strong adhesion, corrosion protection, and a long-lasting finish.

Application

• Use a brush to apply the primer evenly and liberally, ensuring the entire surface is fully covered.
• 1 coat is usually sufficient. A second coat may be applied if needed. Lightly sand between coats if required for a smoother finish.
• Touch dry in approximately 30 minutes, depending on temperature and humidity.
• Allow approximately 2 hours between coats, depending on ambient conditions.
• Ideal application temperature is 15-25°C. Do not apply outdoors if rain is imminent, in high humidity, or below 10°C.
• Approximately 10 m² per litre per coat, depending on surface absorbency.