Overview

Crown Trade Clean Extreme Stain Resistant Scrubbable Matt is a high-performance, water-based emulsion designed for durability and ease of maintenance in high-traffic interior spaces. Offering 100% more stain resistance than standard matt vinyl emulsions, it allows for effortless cleaning of both fresh and set-in stains without damaging the finish. Independently tested to ISO 11998 Class 1 with up to 10,000 scrub cycles, it delivers exceptional long-term performance, making it ideal for residential spaces as well as commercial environments.

• Water-based matt finish with extreme durability
• 100% more stain resistant than standard matt
• Tough & Scrubbable - withstands up to 10,000 scrubs
• ISO 11998 Class 1 scrub rating
• Effortless cleaning of new and set-in stains
• Ideal for high-traffic interior areas

Tinted Colour Information

Preparation

All surfaces must be suitably dry, and free from anything that will interfere with the adhesion of the materials to be applied.

New Walls and Ceilings Surfaces

• Porous surfaces should be coated with a ‘mist’ coat of f Crown Trade Clean Extreme Stain Resistant Scrubbable Matt diluted with between minimum 20% and maximum 40% clean water by volume. Where clean water is not available, apply one coat of Crown Trade Covermatt Drywall Primer.
• Any areas of surface filling after priming should be touched in with the priming or mist coat diluted as for main areas.
• Powdery surfaces should be primed with one coat of Sandtex Trade Water Based Stabilising Solution.
• Polished or dense surfaces should be primed with Crown Trade PX3 Primer or where a water-based alternative is required Crown Trade PX4 Primer.

Previously Decorated Walls and Ceilings Surfaces

• Remove all loose, failing or suspect paint.
• Feather edges of sound paint.
• Organic growth must be treated with Sandtex Trade Fungicidal Solution and removed.
• Fill any fixing holes, cracks and shallow surface defects with Sandtex Ready Mixed Filler.
• Patch prime bare, filled and powdery areas as for new surfaces above.
• Wash remaining sound paint with hot water and liquid detergent solution to remove any contaminants, frequently changing the water.
• Any glossy or eggshell surfaces should be wet abraded to provide a key. Rinse with clean water to remove all residues. Allow to dry.
• If after cleaning any areas are still contaminated with substances likely to cause staining and / or bleeding, patch prime with one coat of Crown Trade PX4 Primer

New Wood Surfaces

• Remove all dust.
• Timber with oils/extractives must be swabbed with clean methylated spirits, frequently changing the face of the cloths.
• Treat any knots with two coats of fresh knotting.
• Fill any fixing holes, open joints and shallow surface defects with Sandtex Ready Mixed Filler. Rub down with a suitable grade of abrasive paper. Remove all dust.
• At the end of preparation prime the surface with one coat of a suitable Primer Undercoat.

New metals

• Lightly abrade to a bright (not polished) surface – excluding galvanised surfaces.
• Prime the surface with one coat of a suitable metal primer, then bring forward with one coat of a suitable Primer Undercoat.

Galvanised Metal

• Bright galvanised surfaces should be pre-treated with Crown Trade Protective Coatings T Wash. Overall blackening of the surface will confirm satisfactory surface preparation.
• Then dry prime with one coat of a suitable metal primer.

Non-ferrous metals

• Prime bare metal with one coat of a suitable metal primer.

Ferrous Metals

• Remove all millscale and rust back to clean bright metal. Remove all residues.
• Prime within the working day with one coat of a suitable metal primer.

Previously Decorated Wood Surfaces

• Remove all loose, failing or suspect paint. Remove grey and denatured surfaces by rubbing down with abrasive paper.
• Feather edges of sound paint.
• Remove all dust.
• Organic growth must be treated with Sandtex Trade Fungicidal Solution and removed.
• Treat knots with two thin coats of fresh knotting.
• Fill any fixing holes, cracks and shallow surface defects with a suitable filler.
• Wash remaining sound paint with hot water and liquid detergent solution to remove any contaminants, frequently changing the water.
• Wet abrade to provide a key.
• Rinse with clean water to remove all residues. Allow to dry.
• Spot prime bare areas with one coat of a suitable Primer Undercoat.

Previously Decorated Metal Surfaces

• Remove all corrosion or rust back to clean bright metal.
• Organic growth must be treated with Crown Trade Fungicidal Solution and removed.
• Spot prime areas with a suitable metal primer. Allow to dry.
• Wash remaining sound paint with hot water and liquid detergent solution to remove any contaminants, frequently changing the water.
• Any glossy or eggshell surfaces must be wet abraded to provide a key.
• Rinse with clean water to remove all residues. Allow to dry.
• Bring forward spot primed areas and undercoat overall with a suitable Primer Undercoat.

Application

Always test a small area of the surface to be painted to ensure you are happy with the finished results

• Stir well before and during use.
• Apply 2 coats using a good quality synthetic brush or medium pile roller. For airless spray (dilution may be required). For further information follow the spray manufacturer’s guidelines.
• Always intermix packs for colour consistency. Please check for colour accuracy prior to application. Crown Paints or Next Day Paint is not liable for decorating costs caused as a result of an incorrect colour being applied.
• The product will take 1 week to become fully cured and scrubbable.

Note: Certain colours may require additional coats to give complete obliteration.

Always follow manufacturer's instructions found on the tin

Aftercare & Storage

Between maintenance redecoration, surfaces may be washed with a warm water and liquid detergent solution to remove surface dirt.

Store in secure dry conditions between 5°C and 40°C and inaccessible to children or animals. Containers should be kept closed during storage.