Armstead Trade Undercoat Paint
Armstead Trade Undercoat Paint
Overview
Armstead Trade Undercoat is a high-performance, solvent-based undercoat designed to deliver a smooth, even base for a durable topcoat finish. Suitable for interior and exterior wood, metal, and suitably primed masonry, it provides excellent opacity and coverage, helping to enhance the appearance and durability of your final coat.
Specially formulated for use with Armstead Trade High Gloss, this undercoat ensures superior adhesion, improved colour depth, and a long-lasting professional finish. Its low sheen formulation makes it easy to apply and perfect for achieving a consistent, high-quality result.
- Good opacity for excellent coverage and hiding power
- Low sheen finish for a smooth, even base
- Ideal basecoat for Armstead Trade High Gloss systems
Achieve a flawless, durable paint finish with Armstead Trade Undercoat, the perfect foundation for lasting professional results.
| Area | Interior & Exterior |
| Recommended Use | Wood, metal, and primed masonry |
| Base | Solvent based |
| Coverage | Up to 15m² per litre |
| Drying Time | 2-6 hours |
| Re-Coat Time | 6-16 hours |
| Recommended Coats | 1 coat |
| Application Method | Brush or roller |
| Clean Up | Remove as much paint as possible from brushes before cleaning with white spirit |
Preparation
Ensure all surfaces are clean, dry, and free from any defective or poorly adhering material such as flaking paint, dirt, or grease.
- Thoroughly rub down previously painted surfaces using wet flatting methods where possible, then wipe clean with a damp, lint-free cloth.
- Treat any knots in timber with a suitable knotting solution such as Ronseal's Knotting Pale.
- New or bare surfaces should be primed with an appropriate primer before applying Armstead Trade Undercoat.
- Special precautions should be taken when preparing pre-1990s paint surfaces over wood or metal, as these may contain harmful lead. Always follow relevant safety guidance and wear suitable protective equipment.
Application
Always follow the manufacturers instructions found on the tin, it is recommended that a small test area is applied before painting the entire surface to ensure compatibility.
- Apply by brush or roller. For health and safety reasons associated with solvent-based paints, spray application is not recommended.
- As with other solvent-based coatings, do not apply in temperatures below 5ºC, in accordance with British Standard BS 6150.
- Stir thoroughly before use.
- For best results, apply one even coat of Armstead Trade Undercoat allow to dry for up to 16 hours before applying a top coat
- Apply one or two coats of Armstead Trade High Gloss or Armstead Trade High Gloss Tinted Colour Match to achieve a durable, professional-quality finish.