Overview

Zinsser Ceiling Pro 5-in-1 is a water-based paint that seals, primes, covers stains, bridges cracks and finishes interior ceilings. Zinsser’s ground breaking technology effortlessly creates a perfectly finished ceiling, whilst sealing stains including water and smoke and bridging hairline cracks. It also contains a biocide that protects the dried coating against fungal degradation, prolonging the life of your painted ceiling. These outstanding features combine with a 1 hour recoat time, low odour and ultra low VOC content.

• Water-Based, low odour
• Non yellowing
• For bare and previously painted ceilings

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, grease, oil, wax, mould or possible contaminates that may interfere with adhesion.

• Remove any mould or mildew before painting, for any heavy mould use Zinsser Mould Killer & Remover
• All dust must be removed to not contaminate with the paint
• Ensure surface has a moisture content of less than 15%
• Exposed nail heads should be countersunk and filled

Application

Always test a small area to ensure you are happy with the final results.

• Stir thoroughly before use
• Apply using a brush, roller or airless sprayer
• Do not thin if using a brush or roller the product is ready to use
• Zinsser Ceiling Pro 5-in-1 may be thinned up to 5% with clean water, when spraying
• Allow the first coat to dry for 1 hour
• 2 coats may be needed if covering dark surfaces or stubborn stains
• The surface will be fully cured in 4 hours

Note: Always follow the manufacturer instructions found on the tin.