Overview

Zinsser Bulls Eye 1-2-3® can be tinted towards your top coat colour, to help overall coverage. Please enter the colour of your top coat in the box provided.

The colour will not be an exact match of the top coat, it will be the correct shade of primer suitable for the job.

Zinsser Bulls Eye is an all surface water-based primer and sealer for use on interior and exterior surfaces. A ‘bond coat’ primer, it is ideal for hard-to-stick surfaces, giving excellent adhesion without sanding.

Tinted towards the colour of the top coat
Adheres to all surfaces without sanding
Seals stains & tannin bleed
Dries in 30 mins, re-coat in 1 hour
Seals graffiti, grease spots, bitumen and asphalt

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Zinsser tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay.

Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

A tinted primer can be used to help obtain the true depth of colour for your top coat or to reduce the amount of coats required when a drastic colour change is occurring. A tinted primer will not necessarily be the same colour as your selected topcoat. It will be tinted towards the topcoat colour and generally lighter in shade. For example if your topcoat is black your primer may be a shade of grey. If you are unsure about when a tinted primer is required please contact us and we can advise further.

Area	Interior & Exterior
Recommended Use	Apply to interior and exterior walls, ceilings, doors, trim, fascia, soffits, foundations, railings, and related paintable surfaces
Base	Water-Based
Coverage	Up to 10m² per litre
Drying Time	30 minutes
Re-Coat Time	1 Hour
Recommended Coats	1-2 Coats
Application Method	Brush, Roller, Conventional Spray
Clean Up	Remove as much paint as possible from the equipment before cleaning with water

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss. Also ensure the product is free from excessive chalky material, grime, grease, oil, wax, mould or any contamination that may interfere with adhesion.

Always wash the surface with a household cleaner, appropriate cleaning solution, or solvent. Clean new galvanised metal with methylated spirit
Always ensure to remove loose or flaking material
Sand any remaining paint to a smooth surface
Sand exterior wood with a 80-100 grit sandpaper
When sealing a stain always attempt to remove as much of the stain as possible prior to application
New plaster should be sealed with Zinsser Gardz
To remove mould, treat area with Zinsser Mould Killer & Remover
Treat knots and sap streaks with Zinsser B-I-N Primer-Sealer