Overview

Zinsser AllCoat Water Based Exterior Gloss Paint is ideal for use on all outdoor surfaces including uPVC windows and doors, wood, metal, masonry, plastic, concrete, and cladding. It offers superb protection and adhesion to all exterior surfaces, the paint forms a vapour-permeable, low maintenance, mould resistant coating. It's extremely quick to apply. It's recoatable in as little as an hour and can be used in an airless sprayer, so it's ideal for larger areas such as warehouses. Zinsser AllCoat Gloss is also resistant to cracking, blistering, and flaking and will act as a primer and sealer. Also available in Matt or Satin

Self-priming and excellent adhesion
Multi-surface application
Mould resistant
Resists cracking, flaking & peeling
Suitable for use in an airless sprayer
Tintable to RAL, NCS, Brand Colours and British Standard 4800, 381C and 5252F

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Zinsser tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

Area	Exterior
Recommended Use	Ideal for new or previously painted wood, metal, cladding, UPVC, stucco, brick, stone, cured concrete and more.
Base	Water-Based
Coverage	Up to 12m² per litre (on non porous surfaces)
Drying Time	4 Hours, Touch Dry 1 Hour
Re-Coat Time	4 Hours
Recommended Coats	2-3 Coats
Application Method	Brush, Roller or Sprayer
VOC Levels	Moderate
Clean Up	Water

Preparation

Always ensure the surface to be treated is clean, dry, sound, and free from any dust or possible contaminates that may interfere with adhesion.

Remove any loose or peeling paint and sand the edges of any remaining paint until smooth
Remove any mould or mildew with a suitable fungicidal wash
Timber at risk of decay or insect rot should be treated with a wood preserver

New Concrete & Masonry

Must be allowed to cure for at least 30 days before painting

New or Bare Wood

Spot prime any knots or sap streaks with Zinsser B-I-N Primer Sealer
Fill any nail holes or gouges

Note: Special precautions should be taken during surface preparation of pre-1960 paint surfaces as they may contain harmful lead.

Application

Before applying we always recommend testing a small area of the surface to be treated to ensure you are happy with the finished results.

Shake or stir well before application
Apply using a synthetic bristle brush, roller or sprayer (for airless spraying, use a .017” tip and high-medium 2000-2500 PSI pressure)
Ensure temperature is between 10° - 32°C
Avoid working in direct sunlight
Apply the first coat and allow to dry for 1 hour
Apply a second coat, paint will fully cure in 7 days
Normal application is 2 coats, however, an additional coat should be applied to areas of high exposure such as sills and fascia boards.

Note: Strong colours may require extra coats or a primer to achieve full strength and opacity we recommend using Bulls Eye 123 tinted to match the top coat. Always follow the manufacturer's instructions found on the tin.