Overview

Zinsser AllCoat is a water-based, gloss finish that is ideal for use on all exterior surfaces including wood, metal, masonry, plastic, concrete, and cladding. It offers supreme protection and adhesion to all exterior surfaces, the paint forms a vapour-permeable, low maintenance, mould resistant coating. It's extremely fast to apply as it's recoatable in as little as an hour and can be used in an airless sprayer which makes it ideal for larger areas such as warehouses. Zinsser AllCoat Gloss is also resistant to cracking, blistering and flaking and will act as a primer and sealer, meaning, for most jobs, there is no need to purchase a separate primer.

Self-priming and excellent adhesion
Multi-surface application
Mould resistant
Resists cracking, flaking and peeling

Area	Exterior
Recommended Use	Ideal for new or previously painted wood, metal, cladding, UPVC, stucco, brick, stone, cured concrete and more.
Base	Water-Based
Coverage	Up to 12m² per litre (on non porous surfaces)
Drying Time	4 Hours, Touch Dry 1 Hour
Re-Coat Time	4 Hours
Recommended Coats	2-3 Coats
Application Method	Brush, Roller or Sprayer
VOC Levels	Moderate
Clean Up	Water

Preparation

Always ensure the surface to be treated is clean, dry, sound, and free from any dust or possible contaminates that may interfere with adhesion.

Remove any mould or mildew with a suitable fungicidal wash
Timber at risk of decay or insect rot should be treated with a wood preserver

New Concrete & Masonry

Must be allowed to cure for at least 30 days before painting

New or Bare Wood

Spot prime any knots or sap streaks with Zinsser B-I-N Primer Sealer
Fill any nail holes or gouges

Note: Special precautions should be taken during surface preparation of pre-1960 paint surface as they may contain harmful lead.

Application

Before applying we always recommend to test a small area of the surface to be treated to ensure you are happy with the finished results.

Shake or stir well before application
Apply using a synthetic bristle brush, roller or sprayer (for airless spraying, use a .017” tip and high-medium 2000-2500 PSI pressure)
Ensure temperature is between 10° - 32°C
Avoid working in direct sunlight
Apply the first coat and allow to dry for 1 hour
Apply a second coat, paint will fully cure in 7 days
Normal application is 2 coats, however an additional coat should be applied to areas of high exposure such as sills and fascia boards.

Note: Always follow the manufacturer's instructions found on the tin.