Overview

Zinsser AllCoat Solvent Based Stain Killer is a 4 in 1 solvent-based interior refurbishment paint that seals, primes, block stains and finishes. Ideally suited to commercial interior applications and offers exceptional spray-ability. It can be applied over glossy surfaces, enamel paint, upvc, ceramic tile and metals. It will block fire and smoke damage and nicotine stains. Extremely quick drying times and very low odour, ideal for warehouses, factories and supermarkets.

We can tint this paint: Zinsser AllCoat Solvent Based Stain Killer Interior Tinted

• Ideal for airless sprayers
• Non yellowing
• Adheres to all surfaces without sanding
• Ideal for commercial settings

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, grease, oil, wax, mould or possible contaminates that may interfere with adhesion.

• Clean the surface to be painted with a cleaning solution or solvent
• Remove any unsoundly ashered coatings
• Sand any old paint to a smooth surface
• Attempt to remove existing stains by washing, sanding, scraping etc
• Remove any mildew with an appropriate mildew cleaner
• Countersink any exposed nail heads and fill any gaps or holes with an appropriate filler
• Remove rust and wipe metal with a cloth dampened in alcohol
• Clean new galvanised metal with methylated spirit with a final rinse in vinegar to remove oils
• Spot prime knots and sap streaks with Zinsser B-I-N Primer-Sealer

Application

Before applying we always recommend to test a small area of the surface to be treated to ensure you are happy with the finished results. Always follow the manufacturer's instructions found on the tin.

• Shake or stir well before application
• Apply using a synthetic bristle brush, roller or sprayer (for airless spraying, use a .017” tip and 2500 PSI pressure)
• Ready to use no dillution necessary
• In most cases only one coat ois required however porous surfaces may require two coats.
• Prime entire surface for best results.