Zinsser AllCoat (Solvent Based) Stain Killer Interior Dead Flat Paint- Tinted Colour Match
Zinsser AllCoat (Solvent Based) Stain Killer Interior Dead Flat Paint- Tinted Colour Match
Overview
Zinsser AllCoat Solvent Based Stain Killer is a 4 in 1 solvent based interior refurbishment paint that seals, primes, block stains and finishes. Ideally suited to commercial interior applications and offers exceptional spray-ability. It can be applied over glossy surfaces, enamel paint, upvc windows and doors, ceramic tile and metals.
- Ideal for airless sprayers
- Suitable for commercial settings
- Non yellowing, virtually odour free
- Tintable to RAL, NCS, Brand Colours and British Standard 4800, 381C and 5252F
Tinted Colour Information
Tinted paint is custom mixed in house at Next Day Paint using our Zinsser tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.| Area | Interior |
| Recommended Use | All interior surfaces |
| Base | Solvent-Based |
| Coverage | Up to 9m² per litre |
| Drying Time | 1 Hour Touch Dry |
| Re-Coat Time | Recoatable - 2 Hours. Full cure - 7 days |
| Recommended Coats | 1 Coat |
| Application Method | Brush, Roller or Sprayer |
| VOC Levels | High |
| Clean Up | White Spirit |
Preparation
Always ensure the surface to be treated is clean, dry and free from any dust, grease, oil, wax, mould or possible contaminates that may interfere with adhesion.
- If unsure, always clean the surface to be painted with a cleaning solution or solvent
- Remove any unsoundly ashered coatings
- Sand any old paint to a smooth surface
- Attempt to remove existing stains by washing, sanding, scraping etc
- Remove any mildew with an appropriate mildew cleaner
- Countersink any exposed nail heads and fill any gaps or holes with an appropriate filler
- Remove rust and wipe metal with a cloth dampened in alcohol
- Clean new galvanised metal with methylated spirit with a final rinse in vinegar to remove oils
- Spot prime knots and sap streaks with Zinsser B-I-N Primer Sealer
Application
Before applying we always recommend to test a small area of the surface to be treated to ensure you are happy with the finished results. Always follow the manufacturer's instructions found on the tin.
- Shake or stir well before application
- Apply using a synthetic bristle brush, roller or sprayer (for airless spraying, use a .017” tip and 2500 PSI pressure)
- Ready to use no dillution necessary
- In most cases only one coat ois required however porous surfaces may require two coats.
- Prime entire surface for best results.
Note: Strong colours may require extra coats or a primer to achieve full strength and opacity we recommend using Bulls Eye 123 tinted to match the top coat.