Overview

Zinsser AllCoat Gloss is a solvent-based, gloss finish that is ideal for use on all exterior surfaces including wood, metal, masonry, plastic, stucco, brick, stone, cured concrete and cladding. It offers supreme protection and adhesion to all exterior surfaces and will form a vapour permeable, low maintenance, mould resistant coating. Zinsser AllCoat is also resistant to cracking, blistering and flaking for up to 15 years before first maintenance on all suitably primed exterior surfaces. Also available in Satin and Water-Based formula

Up to 15 years protection
Multi-surface application
Mould resistant
Excellent colour retention

Area	Exterior
Recommended Use	Ideal for new or previously painted wood, metal, cladding, UPVC, stucco, brick, stone, cured concrete and more.
Base	Solvent-Based
Coverage	Up to 10m² per litre
Drying Time	16 Hours. Touch dry 4 Hours
Re-Coat Time	16 Hours
Recommended Coats	2-3 Coats
Application Method	Brush, Roller or Sprayer
VOC Levels	High
Clean Up	White Spirit

Preparation

Always ensure the surface to be treated is clean, dry, sound, and free from any dust or possible contaminates that may interfere with adhesion.

Remove any mould or mildew with a suitable fungicidal wash
Timber at risk of decay or insect rot should be treated with a wood preserver

New Concrete & Masonry

Must be allowed to cure for at least 30 days before painting

Previously Painted Surfaces

Very hard or glossy surfaces should be abraded and degreased before applying two coats

New or Bare Surfaces

Apply a suitable primer such as Zinsser Bulls Eye 123 on concrete, masonry or brick

New or Bare Wood

Spot prime any knots or sap streaks with Zinsser B-I-N Primer Sealer
Fill any nail holes or gouges
Prime with a suitable primer such as Zinsser Cover Stain

Note: Special precautions should be taken during surface preparation of pre-1960 paint surface as they may contain harmful lead.

Application

Before applying we always recommend to test a small area of the surface to be treated to ensure you are happy with the finished results.

Shake well before and during application
Apply using a synthetic brush, roller or sprayer (For airless spraying, use a .017” tip and high-medium 2000-2500 PSI pressure)
Only apply when temperatures are between 5°-32°C and avoid painting in direct sunlight
Apply the first coat and allow to dry for approximatley 16 hours (paint will be touch dry in 4 hours) please note drying times will be extended in cooler temperatures
Apply a second coat
Allow to dry for 16 hours, paint will be fully cured in 7 days
Normal application is 2 coats, however an additional coat should be applied to areas of high exposure such as sills and fascia boards

Always follow the manufacturer's instructions found on the tin.