Overview

Toupret Exterior Quick Fill Filler is a ready-to-use filler perfect for fast exterior repairs. This lightweight filler provides a one-coat solution with zero shrinkage and no depth limit, ready for painting in just 1 hour, with a resin-rich formula for added strength. Easy to use and quick drying it's ideal for efficiently fixing gaps and cracks on exterior walls whilst ensuring durable results.

Ideal for fast exterior repairs of gaps, holes and cracks.
Ready to paint in only 1 hour
Rich in resin for extra strength
Will not shrink or slump
Easy to sand
No depth limit
Colour: Light Grey

Area	Exterior
Recommended Use	Painted or unpainted substrates: gypsum plaster, cement, concrete, breeze blocks, bricks, stones, old painted surfaces, cellular concrete
Drying Time	Ready to be painted: 1 hour (after complete drying) Working time: No limit
Re-Coat Time	When the first coat of filler is hard and dry to the touch.
Application Method	Filling knife, Trowel or Blade
Clean Up	Product residue can be rubbed off tools when dry - water cleaning is not necessary

Preparation

Substrates must be hard, cohesive, clean, and sound.

Substrates to be prepared as per the current trade practices.

Remove any loose debris and dust the hole ready for filling.

Application

This filler is ready to use.

Fill the hole liberally using a filling knife, being sure not to miss small cavities as you go.
Level the surface, passing over the area in different directions. There is no fill depth limit.
Once the filler is dry, sand if necessary and dust off.
The surface can be painted 1 hour after application depending on the substrate, coat thickness, and ambient conditions. Toupret Exterior Quick Fill Filler can be overcoated with all types of waterborne or mineral paints: waterproofing coatings and Toupret exterior fillers. Do not cover straight over with polyurethane or solvent-based epoxy paints, unless primed with a waterborne exterior paint.

1L fills about 1L

Note: It is recommended to wear gloves and glasses while applying this product. Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.

Always follow manufacturer's usage instructions and refer to the technical data sheet