{"product_id":"timbabuild-fine-finish-surface-filler-300g","title":"Timbabuild Fine Finish Surface Filler - 300g","description":"\u003ch1\u003eOverview\u003c\/h1\u003e \u003cp\u003eTimbabuild® Fine Finish Surface Filler, manufactured by Chemfix, is a high-strength, two-part wood filler designed to create a smooth, professional finish over Timbabuild wood repairs. It is ideal for filling small imperfections, pinholes, uneven areas and surface marks after a repair has been sanded.\u003c\/p\u003e\n\u003cp\u003eFinish is supplied in a patented two-part cartridge system that dispenses the resin and hardener in the correct ratio, making it quick and simple to mix and apply. The system is designed to provide consistent results with minimal effort.\u003c\/p\u003e\n\u003cp\u003eOnce mixed, Finish can be applied as a thin \u003cstrong\u003etop coat over Timbabuild repairs\u003c\/strong\u003e, helping to create a smooth, even surface ready for sanding and decorative finishing. It is fast curing and can be sanded after approximately 30 minutes at 20°C.\u003c\/p\u003e \u003cp\u003eFinish can also be used independently as a durable, two-part wood filler for small timber repairs. The natural finish can be \u003cstrong\u003estained, varnished or painted\u003c\/strong\u003e, while its styrene-free formulation makes it suitable for indoor use with less odour.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-part, high-strength wood filler\u003c\/li\u003e\n\u003cli\u003eIdeal for finishing Timbabuild wood repairs\u003c\/li\u003e\n\u003cli\u003eFills pinholes, imperfections and uneven surfaces\u003c\/li\u003e\n\u003cli\u003eStyrene-free formulation\u003c\/li\u003e\n\u003cli\u003eFast curing – ready to sand in approximately 30 minutes at 20°C\u003c\/li\u003e\n\u003cli\u003eCan be stained, varnished or overpainted\u003c\/li\u003e\n\u003cli\u003eAccurate resin and hardener mixing through the cartridge system\u003c\/li\u003e\n\u003cli\u003eReusable cartridge system\u003c\/li\u003e\n\u003cli\u003eEasy to mix and apply with a decorator's knife or spatula\u003c\/li\u003e\n\u003cli\u003eSuitable for use as an independent two-part wood filler for small repairs\u003c\/li\u003e\n\u003cli\u003e18-month shelf life\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e\n\u003ctd\u003eArea\u003c\/td\u003e\n\u003ctd\u003eInterior \u0026amp; Exterior\u003c\/td\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Use\u003c\/td\u003e\n\u003ctd\u003eProviding an easy-to-sand top coat that will completely fill any small imperfections.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying Time\u003c\/td\u003e\n\u003ctd\u003eCured and ready for painting within 30 minutes (at 20ºC).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Method\u003c\/td\u003e\n\u003ctd\u003eFilling knife, Trowel or Blade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cp\u003eBefore application, ensure the surface is clean, dry and sound. When applying Finish over a Timbabuild repair, make sure the cured repair has been properly sanded and is free from surface dust and loose material.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the cartridge:\u003c\/strong\u003e Place the Finish cartridge into the appropriate extrusion tool. Remove the cap and plug. The plug can be discarded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDispense the product:\u003c\/strong\u003e Squeeze the required amount of material onto a clean, suitable mixing board. When using a new cartridge, \u003cstrong\u003ediscard the first 10 ml of material\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix thoroughly:\u003c\/strong\u003e Using a clean spatula, knife or similar tool, mix the two components until a \u003cstrong\u003esmooth, evenly coloured and streak-free consistency\u003c\/strong\u003e is achieved.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrape while mixing:\u003c\/strong\u003e Scrape the filler clear of the mixing board and spatula at least once during mixing. This helps ensure that the resin and hardener are thoroughly combined and prevents unmixed material from being applied.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003col\u003e \u003cli\u003e\n\u003cstrong\u003eApply Finish:\u003c\/strong\u003e Using a spatula, decorator's knife or similar suitable tool, spread a small amount of mixed FINISH over the prepared repair area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeave slightly proud:\u003c\/strong\u003e Apply enough material to fill any imperfections, pinholes or uneven areas, leaving the FINISH slightly proud of the surrounding surface so it can be sanded flush once cured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow to cure:\u003c\/strong\u003e At approximately \u003cstrong\u003e20°C\u003c\/strong\u003e, Finish is ready to sand after around \u003cstrong\u003e30 minutes\u003c\/strong\u003e. Lower temperatures may increase the curing time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSand smooth:\u003c\/strong\u003e Once fully cured, sand the repair using a suitable \u003cstrong\u003efine-grit sandpaper\u003c\/strong\u003e until a smooth, even surface is achieved.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecorative finishing:\u003c\/strong\u003e Remove sanding dust and follow the normal preparation procedure before painting, staining or varnishing. FINISH is compatible with most decorative wood finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReuse the cartridge:\u003c\/strong\u003e After use, replace the cartridge cap. \u003cstrong\u003eDo not replace the plug.\u003c\/strong\u003e The remaining product can then be used again within its shelf life.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor best results:\u003c\/strong\u003e Use the Timbabuild Professional Silicone Tool for controlled, consistent extrusion. Its geared trigger action provides smooth application and helps ensure the resin and hardener are dispensed in the correct ratio.\u003c\/p\u003e\u003ch2\u003eAftercare \u0026amp; Storage\u003c\/h2\u003e\u003cp\u003eOnce FINISH has fully cured and has been sanded smooth, the repaired area can be finished with most suitable decorative wood coatings.\u003c\/p\u003e\n\u003cul\u003e \u003cli\u003eRemove all sanding dust before applying paint, stain or varnish.\u003c\/li\u003e \u003cli\u003eAllow any decorative coating to dry and cure in accordance with the coating manufacturer's instructions.\u003c\/li\u003e \u003cli\u003eFor exterior timber, ensure the repaired area is adequately protected with a suitable exterior wood coating to help prevent moisture ingress.\u003c\/li\u003e \u003cli\u003eInspect repaired areas periodically for signs of cracking, coating failure or further timber deterioration.\u003c\/li\u003e \u003cli\u003eMaintain the surrounding paint or protective coating system to help protect the timber from moisture and weathering.\u003c\/li\u003e \u003cli\u003eAvoid exposing the repair to excessive moisture or heavy use until the complete repair and decorative coating system has fully cured.\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eStore Timbabuild FINISH in its original cartridge, with the cap securely fitted, in a suitable dry location away from direct sunlight and extreme temperatures.\u003c\/p\u003e\n\u003cul\u003e \u003cli\u003eReplace the \u003cstrong\u003ecartridge cap after use\u003c\/strong\u003e; do not replace the plug.\u003c\/li\u003e \u003cli\u003eKeep the cartridge clean and free from contamination.\u003c\/li\u003e \u003cli\u003eStore in accordance with the manufacturer's recommended conditions.\u003c\/li\u003e \u003cli\u003eKeep away from excessive heat and sources of ignition.\u003c\/li\u003e \u003cli\u003eDo not use the product beyond its stated \u003cstrong\u003e18-month shelf life\u003c\/strong\u003e.\u003c\/li\u003e \u003cli\u003eKeep out of reach of children and follow the relevant safety information supplied with the product.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Timbabuild","offers":[{"title":"Default Title","offer_id":57448497807526,"sku":"zih1789764832248","price":5.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/7649\/4758\/files\/timbabuild-fine-finish-surface-filler---300g_1.png?v=1789764837","url":"https:\/\/printmotifwear.shop\/products\/timbabuild-fine-finish-surface-filler-300g","provider":"My Store","version":"1.0","type":"link"}