Overview

Tikkurila Anti-Reflex White 2 is a water-based, latex paint that has been designed to deliver a flat, deep matt finish, eliminating flashing and removing surface imperfection making it ideal for a smooth white finish on interior ceilings, and can also be used on walls. With an exceptionally high opacity, one coat of paint is enough to cover white or surfaces. Combined with a non-dripping/non-splashing formula Anti-Reflex White 2 is easy to apply leaving a neat flat finish regardless of the light angle. Tikkurila Matt Xtreme technology allows easy touch-ups and delivers a finished result that is resistant to delicate washing.

Eliminates light reflex for uniform ultra matt surface
Neutral smell
Ultra Low VOC
Interior Ceiling & Walls for residential, office and public use buildings

Area	Interior
Recommended Use	Putty surfaces, plaster, fireboard, chipboard and plaster facing and fiberglass wall papers, decorative painting of concrete
Base	Water-Based
Coverage	Up to 11m2 per litre
Drying Time	Touch dry: 30 Minutes
Re-Coat Time	3 Hours
Recommended Coats	2 Coats
Application Method	Brush, Roller or Sprayer
VOC Levels	Low
Clean Up	Remove as much paint as possible from the equipment before cleaning with water

Preparation

Ensure the surface is clean, dry and free from dirt and grease.

Unpainted surfaces (putty surfaces, plaster, concrete and chipboards, fibreboards and gypsum boards): clean these surfaces from dust and loose particles. Prime with Tikkurila Optiva Primer or Tikkurila Anti-Reflex white 2 thinned with water up to 20%.
Previously painted surfaces with dispersion, alkyd and oil paints: Wash the surface before painting and remove grease. Remove flaking fragments, sand the surface and clean with water. Sand glossy surfaces with mid-grained sanding paper. Clean the surface with water and let to dry.
Surfaces painted with glue or lime paint: Remove thoroughly the lime or glue paint till the plaster. Smooth out irregularities and losses with putty. Prime the whole surface with Tikkurila Optiva Primer or Tikkurila Anti-Reflex White 2 thinned with water up to 20%.
Spackling and filling the losses: It is recommended to check if the used putty is strong and stable surface – if after delicate hand wipe the putty is falling or leave the dust on hand then it means that the surface is loose and it has to be primed with Tikkurila Suprabilit. On the previously painted surfaces please make a test painting on the small surface. The positive effect of the test decides on the use of the product.