Thompsons One Coat Patio and Block Paving Seal - 5 Litre
$40.85
Sale price
$40.85
Regular price
$65.89
Skip to product information
Thompsons One Coat Patio and Block Paving Seal - 5 Litre
$40.85
Sale price
$40.85
Regular price
$65.89
Overview
Protect and seal your patio or block paving from the weather in just one coat. One Coat Patio & Block Paving Seal is formulated to protect against oil and fuel stains and resist algae growth. This clear finish leaves you with an enhanced surface that is easy to clean. Ideal for block paving, flagstones including limestone and sandstone.
- Resist oil and fuel stains
- Leaves an easy to clean surface
- Resists algae growth
| Area | Exterior |
| Recommended Use | Suitable for granite, cast, sandstone, limestone, block paving and flagstones. (Not recommended for black limestone) |
| Coverage | Up to 6m² per litre |
| Drying Time | 1 hour to touch dry, 4 hours for light traffic, 24 hours for full use |
| Recommended Coats | 1 coat |
| Application Method | Roller |
| Clean Up | All tools and equipment should be cleaned immediately after use with brush cleaner. |
Preparation
Always ensure the area to be painted is dry and free from dust, dirt and anything that may affect adhesion.
- Give the surface a decent scrub with a stiff bristle brush to remove any dust or dirt.
- If you have any mould or algae, use some Thompson’s Advanced Patio & Block Paving Cleaner.
- Remove stains with Thompson’s Oil & Drive Cleaner.
- Ensure all cleaning solutions are fully rinsed off and the surface is dry before you start.
Application
Always perform a test on a small inconspicuous area to ensure compatibility, we recommend following the manufacturer's instructions found on the container.
- Shake the canister well before use.
- Apply using a long pile roller in long smooth strokes.
- On textured block paving ensure any puddles are spread into dry areas.
- Really rough surfaces might need an extra coat.