Sikkens Cetol Filter 7 Satin Woodstain
Teak - 085 / 2.5 Litre
$82.93
Sale price
$82.93
Regular price
$103.66
Skip to product information
Sikkens Cetol Filter 7 Satin Woodstain
$82.93
Sale price
$82.93
Regular price
$103.66
Overview
Cetol Filter 7 is a highly translucent, medium build, solvent borne woodstain with extra UV Protection for joinery. It provides long term weather protection due to its flexible, water-repellent coating film. It can be used as a two part system with a Cetol HLS base stain on bare wood and will provide 5 years of protection from weathering when used in conjunction.
- Prevents cracking, flaking or peeling
- Allows for the natural grain and quality of wood to show through
- 5 year maintenance cycle
- Microporous and water-repellent
- Satin finish
| Area | Exterior |
| Recommended Use | Exterior softwood and hardwood joinery, windows and doors |
| Base | Solvent based |
| Coverage | Up to 16m² per litre |
| Drying Time | 3 hours |
| Re-Coat Time | 16 hours |
| Recommended Coats | 1-2 Coats |
| Application Method | Brush |
| VOC Levels | High |
| Clean Up | Remove as much product as possible from the brush before cleaning with brush cleaner |
Preparation
Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss.
- Resinous deposits should be removed with a scraper.
- Degrease the surface with a lint free cloth and suitable solvent, allow to evaporate fully before applying Sikkens.
- For previously stained or worn wood use a fine sandpaper of 240 grit work in the direction of to abrade the surface the grain.
- Dust down entire surface.
- Fill any cracks, holes or chips, always use a filler designed for timber.
Application
Before applying stir the product thoroughly and test a small area to ensure colour and adhesion. Colours can vary dependant on surface to be treated.
- Do not apply when there is the risk of rain or when temperatures are below 5°C or above 30°C.
- Protect from frost and rain until dry.
- Always ensure product is fully mixed before and during application to ensure consistency in colour.
- Do not thin.
- Sikkens Cetol HLS can be used as a basestain for joinery items prior to coating with Cetol Filter 7.
- For application use a good quality, long-haired, soft bristle brush.
- Apply along the grain in even strokes and avoid over brushing.
- Use the minimum number of brushstrokes necessary to produce an acceptable finish.
- Pay special attention to areas of exposed grain, tops and bottoms of doors and undersides of cills.
- Allow a minimum of 16 hours drying time.
- The second coat should be applied to all exposed surfaces, as soon as possible after the first coat has dried, but no sooner than 16 hours.
- Additional preparation may be required if over 3 months between coats.
Note: Always follow the manufacturer instructions found on the tin.