Overview

Rustins Woodworm Killer is a low-odour, deep-penetrating treatment designed to effectively eradicate active woodworm infestations and protect against future attacks. Specially formulated for interior use, it soaks deep into the timber, targeting wood-boring insects at their source and ensuring long-lasting protection.

Whether you're treating furniture, floorboards, or structural timbers, Rustins Woodworm Killer is your reliable defence against damage, with minimal disruption and no harsh smell.

• Treats and eradicates existing woodworm infestations
• Prevents reinfestation for peace of mind
• Deep penetration into the wood for effective results
• Long-lasting protection
• Low odour for comfortable indoor use
• Can be re-coated while still wet, saving time on application
• Ideal for use on furniture, beams, floorboards, and more
• Protect your wood from the inside out - with confidence and ease.

Preparation

For the best results, make sure your timber is ready to absorb the treatment:

• Ensure all surfaces are clean and free from old coatings, grease, wax, or any surface contaminants that may block penetration.
• Lightly sand or scrape off any residues if necessary to expose bare wood for maximum effectiveness.
• The wood may be slightly damp, but do not apply to timber that is rotten or decayed, these sections should be removed and replaced before treatment.

Proper prep allows Rustins Woodworm Killer to soak in deeply and deliver the long-lasting protection your wood deserves.

Application

• Shake well before use to ensure the product is thoroughly mixed and ready for effective treatment.
• Apply using a brush or low-pressure spray, making sure to work the solution into all surfaces, crevices, joints, and end grains where woodworm are most likely to be active.
• For optimum protection, apply two full coats.
• Important: The second coat must be applied while the first coat is still wet. This allows deeper penetration and ensures complete coverage before the product begins to dry.
• Drying Time: The surface will begin to dry in approximately 10–15 minutes, depending on temperature and humidity levels.
• Ideal Application Temperature: Apply in conditions between 15°C and 25°C.
• Avoid application in temperatures below 10°C, as this can hinder absorption and drying.

Applying Rustins Woodworm Killer correctly ensures long-lasting protection and peace of mind against infestation. Always follow with appropriate surface finishes if required, after full drying.