Overview

Rustins Quick Dry Brick & Tile Paint is a high-performance, water-based solution designed to deliver a rich matt red finish while offering long-lasting protection. Specially formulated to bond exceptionally well to masonry surfaces, it's ideal for use on bricks, tiles, cement, stone, and walls both indoors and out. Whether you're freshening up exterior brickwork or adding colour to interior features, this quick-drying paint is durable, weather-resistant, and easy to apply, making it a go-to choice for homeowners and professionals alike.

• Water-based and quick drying
• Attractive matt red finish
• Strong adhesion to masonry surfaces
• Tough, weather-resistant coating
• Suitable for both interior and exterior use

Preparation

Ensure the brick surface is clean, dry, and free from dust and contaminants.

• Brush thoroughly using a wire brush to remove any loose mortar, flaking finishes, or surface particles.
• Repair damaged areas by filling cracks and restoring defective pointing.
• If efflorescence (white salt crystals) is present, remove fully by brushing or scraping before painting. After removal, apply a coat of Alkali-Resisting Primer and allow it to dry before using Rustins Quick Dry Brick & Tile Paint.
• No primer is required on new brickwork or where fresh mortar has been applied to the pointing.
• When applying over previously painted surfaces, first test the coating for compatibility. If incompatible, the paint may flake or may dry to an undesirably glossy finish.

Application

• Use a large brush and apply the paint evenly. Work systematically to ensure full coverage.
• One coat is usually sufficient; a second coat may be applied if additional coverage is required.
• Touch dry in approximately 30 minutes, depending on temperature and humidity.
• Allow around 4 hours before applying a second coat if needed.
• Ideal between 15–25°C. Avoid application if rain is imminent or in damp conditions.
• Apply generously but evenly to achieve a smooth, consistent finish across the entire surface.