Rustins Metal Lacquer - 125ml
Rustins Metal Lacquer - 125ml
Overview
Rustins Metal Lacquer is a clear, UV-resistant protective coating designed to maintain the polished appearance of chrome, brass, copper, and silver. It forms a tough, transparent film that won't yellow or craze over time, offering long-lasting clarity and protection. Ideal for decorative fittings, metal ornaments, and household hardware, this lacquer reduces the need for frequent polishing - keeping your metal surfaces gleaming with minimal maintenance.
- Clear, non-yellowing lacquer that maintains its appearance over time
- Excellent adhesion to metals including chrome, brass, copper, and silver
- UV-resistant, providing long-lasting protection against sunlight and environmental effects
- Protects metal surfaces so they require minimal cleaning
- Ideal for decorative and functional metal objects, both indoors and outdoors
Rustins Clear Metal Lacquer provides reliable, lasting protection while enhancing the natural brilliance of your metal surfaces.
| Area | Interior & Exterior |
| Recommended Use |
|
| Base | Low solid lacquer based on a polymethacrylic ester dissolved in a mixture of ketones, alcohols and hydrocarbons. |
| Coverage | Up to 15m2 per litre |
| Drying Time | 2-3 Hours |
| Recommended Coats | 1 Coat |
| Application Method | Brush or spray |
| Clean Up | Clean brushes and equipment with Rustins Cellulose Thinners. |
Preparation
Ensure the metal surface is clean and free from wax, grease, and metal polish.
- Lightly tarnished surfaces should be polished with a good-quality metal polish.
- After polishing, remove all residue with warm, soapy water.
- If the surface has crevices or detailed areas, use a nail brush to ensure no polish remains in gaps.
- Thoroughly dry the metal with a clean cloth before applying the lacquer.
- To prevent incompatibility please remove any old coatings with Rustin’s Strypit Paint & Varnish Stripper.
Proper preparation ensures excellent adhesion and a smooth, long-lasting protective finish.
Application
Always test a small area of the surface to be painted to ensure you are happy with the finished results.
- If possible, remove objects such as letterboxes or fittings so that all edges, including the reverse sides, can be coated.
- Apply the lacquer in dry, warm conditions to prevent “blushing” (a milky finish caused by dampness).
- Apply quickly and evenly using a soft brush.
- The lacquer may also be sprayed.
- Due to its low viscosity, thinning is usually unnecessary.
- If required, thin with Rustins Cellulose Thinners.
- Ensure all edges and recessed areas are coated to maximize protection and adhesion.
- Apply smooth, continuous strokes to avoid uneven finish or streaks.
Following these steps ensures a clear, durable, and long-lasting protective finish on metal surfaces.