Rust-Oleum Universal All Surface Spray Paint - Gloss - White - 400ml

Rust-Oleum Universal Spray Paint - 400ml

White / Gloss
$12.18
Sale price  $12.18 Regular price  $16.68
Skip to product information
Rust-Oleum Universal All Surface Spray Paint - Gloss - White - 400ml

Rust-Oleum Universal Spray Paint - 400ml

$12.18
Sale price  $12.18 Regular price  $16.68
Title

Overview

An all-surface decorative spray paint that will renovate everything from garden furniture to kitchen cupboards. Its comfort grip contains a unique mechanism that delivers an advanced spray system that can dispense at any angle, including upside down. It's chip and fade-resistant and will adhere to even the most demanding surfaces including plastic, metal, brick, and concrete.

  • Fade & chip resistant
  • Rust preventative
  • Adheres to difficult surfaces
  • Easy to use, spray application
Area Interior & exterior
Recommended Use Wood, plastic, metal, brick and concrete.
Coverage Approx. 2m² per Aerosol
Drying Time Touch dry in 30 minutes, hard dry in 24 hours
Re-Coat Time Within 1 hour or after 24 hours
Recommended Coats 2-3 coats
Application Method Areosol Spray

Preparation

Ensure the surface to be painted is clean and free from dust and possible contaminants.

  • On previously painted surfaces remove any loose or flaking material and sand the surface to provide a key.
  • Remove any rust with an appropriate rust remover.
  • Thoroughly clean to ensure the removal of grease and dirt
  • Remove any oil or wax from the surface by sanding or using a suitable stripper

Application

Ensure to perform a test on a small area of the surface to be painted to ensure you are happy with the finished results. Apply only when the temperature is between 10-32°C.

  • Shake the can vigorously for 1 minute after the mixing ball begins to rattle and continue to shake regularly during use.
  • Hold approx 30cm from the surface and spray in a continuous back-and-forth motion.
  • Slightly overlap each stroke.
  • Apply several light coats a few minutes apart or recoat within 1 hour or after 24 hours.

Always follow the manufacturer's instructions found on the can

You may also like