Overview

Ronseal Quick Dry Damp Seal Aerosol permanently fix damp patches in your home. Quick drying and easy to apply Damp Seal, ideal for walls and ceilings. The handy aerosol application is ideal for hard to reach areas and the fast drying formulation takes only 10 minutes to dry allowing you to apply multiple coats quickly. Once finished the surface can be painted or wallpapered over.

• Permanently block damp stains
• Ideal for damp surfaces
• Can be decorated over
• Prevents paint from flaking & peeling

Preparation

Always ensure the surface to be covered is free from dirt, dust, grease, and any loose or flaking paint.

• It is important to fix the core problem of the damp before covering it up otherwise this product may fail and the damp will come back.
• Sand and remove any peeling or flaking paint to leave a smooth surface.
• If you have any mould use Polycells 3 in 1 Mould Killer to remove it.

Application

We recommend performing a test to ensure compatibility, always follow the manufacturer's instructions found on the can.

• Before you start ensure room temperature is above 10°C and the room is well ventilated. Cover any areas and furniture you'd like to protect from over spray.
• Shake the can until you hear it rattle and keep going for a minute.
• Hold it upright and approximately 20-30cm away from the wall or ceiling.
• Spray in a smooth side to side movement for even coverage.
• Wait 10 minutes for the first coat to dry and apply a further 2 coats.
• Allow to dry for 24 hours from the final coat before decorating.

Aftercare & Storage

As this damp seal and not intended to be a top coat, it should be painted or wallpapered over.

Cleaning

To clean the nozzle, just turn the can upside and spray for a few seconds. Then wipe the nozzle with a damp cloth.