Ronseal One Coat Water Based Cupboard Melamine and MDF Paint - 750ml
Overview
Ronseal One Coat Cupboard Paint is a new, water based paint from Ronseal, for transforming interior wood and furniture quickly and easily. The water base gives it several benefits over a solvent based paint. Firstly, it has a much faster drying time of just 1 hour touch dry, as opposed to the solvent based drying time of 4 hours. Recoat time, if needed, is also quicker at 4 hours rather than the 24 hours you have to wait with the solvent based paint. It's low odour, low VOC, easy to apply, quick and easy to clean up and it doesn't yellow over time, because of its water base. No need for a primer and it's tough, durable and water resistant. As with the solvent based version, it stands up to knocks, spills and scuffs.
- No primer needed
- Faster drying time - 1 hour touch dry, 4 hours recoat if necessary
- Very durable
- Non yellowing
- Low odour
- Easy to apply and clean up
| Area | Interior |
| Recommended Use | All wood and melamine furniture, doors, drawers, shelves & skirting |
| Base | Water-Based |
| Coverage | 8m² per litre |
| Drying Time | 1 Hour |
| Re-Coat Time | 4 Hours |
| Recommended Coats | 1 Coat |
| Application Method | Brush |
| VOC Levels | Low |
Preparation
Ensure the surface is clean and free from any built up of kitchen grease and grime. For best results clean with with a degreaser such as Zinsser Professional Universal Degreaser & Stain Remover.
- Repair any damaged or chipped areas with an appropriate wood filler.
- Lightly sand the surface with a 120 grit sandpaper to allow the new paint to adhere.
- Clean the surface and remove any dust with a damp cloth.
- Cover hindges with masking tape.
- We recommend you remove handles for best results.
- Protect flooring and surrounding areas from splashing with a dust sheet.
Application
We always recommend you test a small area to ensure you are happy with adheshion and colour
- Stir the paint thoroughly.
- Apply one coat, with a brush, in a vertical direction.
- Allow to touch dry for 1 hour.
- Check you are happy with the finished coverage and colour. If a strong colour change is need you may need apply another coat.
- Always wait 4 hours between coats.
Note: Always follow the manufacturer instructions found on the tin.