Overview

Ronseal Diamond Hard Floor Wax is a tough floor wax that offers durable protection with a beautiful natural finish. The Diamond Hard formulation offers the protection of a varnish with a softer sheen and look. It's easy to apply to your wooden floors with no need to buff and dry in only 30 minutes. It also has a low odour so there will be no lingering wax smells in your home. Available in two finishes of Natural and Natural Oak.

Beautiful natural finish
Diamond Hard formulation
Quick drying
Low odour

Area	Interior
Recommended Use	Interior wood floors
Base	Oil Based
Coverage	Up to 16m² per litre
Drying Time	Touch dry in 30 minutes, 8 hours for light foot traffic
Re-Coat Time	2 hours
Recommended Coats	3 coats
Application Method	Brush
VOC Levels	Medium

Preparation

Always ensure the surface to be waxed is clean and free from any dust, dirt and grease that may affect adhesion.

Sand the floor with a 120 grit sandpaper. If you’re preparing a floor that was previously painted, use the floor sander to remove all the previous coating.
Vacuum any dust and wipe the floor with white spirit.

Application

We recommend performing a test to ensure compatibility with the surface to be waxed, always follow the manufacturer's instructions found on the tin.

Stir the wax well and apply in the direction of the wood grain.
Paint three or four floorboards at a time to avoid overlap marks.
Allow to dry for two hours before applying a second coat, for best results apply 3 coats.
Before applying the final coat, lightly sand the floor to help the wax stick.
The floor can be walked on after 8 hours and completely dry in 24 hours. Furniture can be replaced after 24 hours.

Aftercare & Storage

Cleaning

General cleaning will keep your floor in good condition, vacuum and sweep up any dirt that may cause scratches and use a damp microfiber cloth to clean up spillages.