Overview

Repair Care DRY FLEX® Mini brings the trusted, professional performance of DRY FLEX® SF into a convenient, compact mini format, designed for smaller repairs where precision and minimal waste matter most.

This unique product combines the best qualities of a fine surface filler and a two-component epoxy into a single, easy-to-use solution. No primer is needed, it cures fast even in colder weather conditions, and delivers a smooth, paintable finish after just 30 minutes at 20°C (or 1 hour at 5°C). The handy mini packaging ensures correct mixing ratios at all times, simply dispense and mix.

Versatile enough for both external and internal applications, DRY FLEX® Mini is certified according to KOMO BRL-0807 and is suitable for use on wood, masonry, plaster, concrete, and metal.

• Combines fine surface filler and epoxy performance in one product
• No primer required - apply directly to a prepared substrate
• Fast cure: paintable after 30 minutes
• Self-dosing mini format ensures correct A:B ratios with every dispense
• Permanent, durable repairs that will not shrink or crack
• Ideal for small, precise repairs with reduced waste
• Suitable for timber, masonry, plaster, concrete, and metal
• For internal and external use

Preparation

1. Remove all paint and dirt from the repair area. Loose, flaking, or contaminated surfaces will compromise adhesion. Always apply to a bare substrate for best results.
2. Ensure the timber is thoroughly dry. Moisture in the substrate can affect curing and adhesion.
3. Sand any raised wood fibres. For cracks and natural defects in new or unpainted wood (up to 6mm), lightly sand the contact surface before application.
4. Clean away all dust and debris. Wipe down the prepared surface before applying the filler.

Note: It is recommended that completed repairs and adjacent untreated wood receive a primer coat within 7 days.

Application

1. Dispense the product: Squeeze DRY FLEX® Mini onto the mixing plate. The cartridge dispenses both components at the correct ratio automatically.
2. Mix thoroughly: Using the EASY•Q™ application knives, mix components A and B until a completely uniform, homogenous colour is achieved.
3. Spread to extend working time: Spread the mixed product in a thin layer across the mixing plate to extend the application period. Avoid placing in direct sunlight.
4. Apply the filler: Apply DRY FLEX® Mini to the repair area and leave the surface smooth.
5. Allow to cure: Typical curing times: 30 minutes at 20°C, or 1 hour at 5°C. Temperature and humidity will affect curing times.
6. Sand and finish: Once fully cured, lightly sand before applying paint or stain. Apply a primer coat within 7 days.