Polyvine Stone And Brick Protector
Polyvine Stone And Brick Protector
Overview
Polyvine Stone & Brick Protector is a water-based masonry protector that penetrates into porous substrates forming a barrier to water, moisture, grease, oil, and salts. Ideal for use internally and externally on stone, plaster, brick, slate, flagstones, brick walls, stones walls, and stone window ledges. This high-performance protector dries to a dead flat finish which is water repellent and will suppress mould and fungal growth. It's highly UV resistant and leaves the surface looking natural after application.
- Protects masonry surfaces
- UV resistant
- Suppresses mould and fungal growth
- Leaves surface looking natural
| Area | Interior & Exterior |
| Recommended Use | Interior and exterior porous surfaces such as stone plaster, brick, slate, flagstones, fireplaces, exposed stone walls, brick walls, stone window ledge |
| Base | Water-based |
| Coverage | Up to 15-20m² per litre |
| Drying Time | 15 Minutes - 1 Hour |
| Recommended Coats | 1 Coat |
| Application Method | Brush, roller or sprayer |
Preparation
Ensure the surface to be coated is clean and free from grease, wax, polish or any contaminate.
- Remove any mould or fungi prior to application, this can be done with a suitable cleaner.
- The surface must be porous, we recommend to remove any previous finishes.
- Clean the surface to ensure there is no dirt or debris that may affect adhesion.
Application
Always test the product on the surface to be painted before embarking on the project to ensure you are happy with the finished results.
- Do not dilute.
- Mix well but do not shake.
- Apply using a brush, sprayer or roller
- Apply one coat and allow to dry for 15 minutes - 1 hour.
Always follow the manufacturer's instructions found on the container.
Aftercare & Storage
Store in unopened containers in a cool dry place away from direct sunlight. Protect from extremes of temperature during storage and application.