Overview

A unique roller applied, white wall and ceiling filler which stabilises and prepares flaky, powdery, or absorbent surfaces, providing a sound foundation for painting. It prepares your walls and ceiling for decorating in just one coat.

• Primes bare plaster
• Stabilises flaky walls
• Seals powdery and porous walls

Preparation

Always ensure the surface to be primed is free from dirt and any contaminates that may effect adhesion.

• Ensure to remove any mould by cleaning the area, we recommend Zinsser's Mould Killer & Remover.
• Fill holes and cracks with a suitable filler.
• Distemper paints must be fully removed before use.
• Allow new plaster to fully dry this will usually take up to 7 days depending on temperatures.

Application

Always follow the manufacturer's instructions found on the packaging. Test on a small area of the surface to ensure compatibility.

• Stir thoroughly prior to application.
• Transfer to a roller tray, and apply using a short pile roller evenly to the surface.
• For best results ensure not to over-apply the product.
• Allow to dry for 2-3 hours before applying your chosen topcoat.