Overview

Peelaway Neutralisier is designed to neutralise the surface after the application of PeelAway 1. The residue of PeelAway 1 may bleed from the treated surface and raise the PH Level which can affect the substrate and any finishes. The PeelAway Neutraliser spare may be needed in more porous surfaces.

• Ideal for use after PeelAway 1
• Neutralises alkaline surfaces

Application

Always test a small area before application to ensure the compatibility of the product

Neutralising

• The alkaline solution must be neutralised on porous surfaces such as wood, plaster, and stone
• After the surface has fully dried any residue should be vacuumed or brushed off. The acetic acid neutraliser should then be lightly sprayed onto the surface and allowed to dry thoroughly.
• If a white powder appears on the surface, simply brush and reapply the neutraliser. If the white powder does not appear in 48 hours the surface should be ready for re-coaing

During very damp periods/conditions such as autumn through to spring, particularly on exterior substrates, moisture containing residues of Peelaway® 1 may bleed out of the substrate at a later date thus raising the alkaline pH value once again. This could affect the appearance of the repainted surface or cause paint failure. As a precaution, if Peelaway® 1 is used and the surface is to be repainted, we would always recommend using a good quality alkaline-resistant acrylic sealer/primer prior to repainting.