Overview

Paint Warrior Flexible Decorators Caulk is a solvent-free sealant that can be used on both exterior and interior applications. The crack-free formulation offers over 12.5% flexibility, making it ideal for sealing around window frames, architraves, cornices, and between skirting boards and walls.

• Solvent free
• 12.5% Flexibility
• Crack resistant
• Interior and Exterior application

Preparation

Ensure the surface is clean and free from any loose material, standing water, or contaminants that may impair the bond. Non-porous surfaces such as aluminum must be cleaned with a suitable product. For applications where some movement will be exhibited i.e. construction joints, the minimum joint dimensions should be 6mm x 6mm with the maximum dimensions being 25mm wide by 12mm deep. Where deeper joints are found, depth can be reduced using a suitable backer rod. Areas of perimeter pointing where a fillet is to be applied, the minimum measurement across must be 10mm with a minimum depth of 6mm. If conditions are suitable for application ensure joints are properly prepared.

Application

We recommend testing a small area to ensure compatibility, always follow the manufacturer's instructions found on the packaging.

• Apply sealant firmly into the joint using an application gun
• Ensure a good solid fill is achieved
• Once applied, sealant can be tooled to required finish
• A degree of natural shrinkage will occur as a result of drying so it is advisable to apply the sealant slightly proud of the required level to allow for this

Each cartridge contains sufficient to cover approximately 11 metres of a 6mm x 6mm joint, excluding wastage.

Note: Not suitable on PE, PP, Teflon and bituminous surfaces - not to be used below ground level