Overview

Osmo Spray Wax is a convenient, sprayable version of Osmo’s renowned Polyx®-Oil, delivering the same durable protection in an easy-to-apply format. Ideal for use in wet rooms and high-traffic areas, this hard-wearing finish provides a breathable, water and dirt resistant surface that won't peel, crack or flake over time.

Perfect for spot repairs and touch-ups, Osmo Spray Wax requires no sanding, making maintenance quick and hassle-free. It enhances the natural beauty of wood while offering long-lasting protection against daily wear and tear.

• Extremely tough and durable finish
• Water and dirt-resistant
• Breathable, crack and peel-resistant formula

Preparation

Follow these instructions to ensure the surface is properly prepared.

• Wood must be clean, dry and free from frost. Moisture content should not exceed 18%.
• Clean off any old microporous stains thoroughly and completely remove old paints or lacquers.
• Always wear a dust mask when sanding.
• Fill small cracks, joints, or holes using Osmo Wood Filler.
• For flooring: finish sanding with P120–150 grit
• For furniture: finish sanding with P220–240 grit.
• Remove all sanding dust with a vacuum or broom.

Wood can vary in texture and absorbency, so always carry out a trial application on an inconspicuous area to check the final result.

Application

• Apply using a cup spray gun, airless/air mix, or HVLP system.
• Recommended application amount: 35–40g/m² per coat.
• Apply evenly and thinly to avoid pooling or over-saturation.
• Approximate coverage: 24m² per litre (per coat).
• Apply 2 coats for optimum protection and finish.
• Allow each coat to dry for 6–8 hours in normal conditions (at temperatures above +5°C and with good ventilation).

Follow the manufacturers instructions found on the packaging.