Overview

Little Greene Traditional Oil Gloss is a premium, high-sheen oil-based paint that delivers a classic, mirror-like gloss finish. Perfect for woodwork, trim and metalwork, and suitable for both interior and exterior use, it’s a great choice for front doors, combining timeless elegance with long-lasting durability.

Formulated with naturally derived vegetable oils, this washable, extremely hard-wearing gloss paint provides exceptional coverage and depth of colour.

• High-Gloss finish: 85% sheen
• Extremely durable & fully washable
• For interior & exterior woodwork and metal
• Smooth flow & long-lasting finish
• Available in all Little Greene colours

Tinted Colour Information

Preparation

Ensure the surface is clean, dry and free from dirt and grease.

Remove all imperfections and repair defects to achieve a smooth, sound surface

New Wood:

• Seal knots in softwoods with knotting compound to prevent staining, then prime with Little Greene Intelligent ASP.
• Resinous hardwoods require cleaning, then treat with Aluminum Wood Primer as required before undercoating.
• Ensure timber moisture is below 15%. Do not paint damp wood.
• Green oak must be weathered at least 6 months before painting.

Metals:

• Clean new metal (ferrous or non-ferrous) to remove rust.
• Bare or corroded iron/steel should receive 2 coats of Little Greene Intelligent ASP.

Previously Painted Surfaces:

• Remove loose or flaking paint and degrease with a suitable detergent (e.g. sugar soap), then rinse with clean water.
• Sand with medium-grade paper to create a smooth, keyed surface, feathering edges where paint has been removed.
• Apply 1 coat of Little Greene Intelligent ASP to promote adhesion to existing coating.

Plastics:

• Clean and lightly abrade surfaces to improve adhesion and durability.
• For optimum results, prime with Little Greene Intelligent ASP.

Always follow manufacturer's instructions found on the packaging

Application

Always test a small area of the surface to be painted to ensure you are happy with the finished results

• Stir thoroughly before use.
• Lightly sand between coats to remove dust and imperfections for a smooth, professional finish.
• Do not apply below 8°C.
• Note: For large flat areas, a roller application is recommended.

For brush application:

• Use a high-quality natural bristle brush suited to the project. Condition new brushes by washing in clean white spirit and drying with a lint-free cloth.
• Avoid dipping the brush too deep or overloading with paint.
• Apply in even strokes, maintaining a wet edge.
• Keep final strokes in one direction and avoid re-working once paint starts to dry to prevent lap marks.
• For intricate work or in warm/dry conditions, extend open time by adding 5% (v/v) whte spirit.

For roller application:

• Use a foam roller sleeve for smooth surfaces.
• Keep final strokes in one direction and avoid re-working once paint starts to dry to prevent lap marks.

For sprayer application:

• Conventional: Thin up to 25% (v/v) white spirit. Tip: 1.60–2.00 mm (62–78 thou). Air pressure: 0.28–0.41 MPa (40–60 psi).
• Airless: Thin up to 10% (v/v) white spirit. Tip: 0.28–0.54 mm (11–21 thou). Pressure: 12.6–19.6 MPa (1800–2800 psi).

Always follow manufacturer's instructions found on the packaging

Aftercare & Storage

Storage: Keep unused paint in a cool, dry, frost-free place away from sunlight and sources of ignition. Replace lids securely after use. When unopened and stored correctly, the product remains stable for at least 2 years.

Cleaning: For light dirt, gently wipe with a damp sponge or lint-free cloth using a lukewarm solution of mild washing-up liquid. Repeat as needed. Remove DIY dust by vacuuming, using a soft brush attachment to avoid marking nearby surfaces. Make sure radiators are at room temperature before cleaning. Cleaning while hot can cause uneven or patchy polishing.

Care: Avoid placing heavy objects on painted surfaces for one week. Consider applying suitable beeswax polish to high-use areas such as bookshelves to reduce long-term marking.

Repair: Lightly rub down the area, apply suitable primer to any exposed surface, then repaint the whole section with one or two coats as needed. Please note that spot repairs may not match the original finish. Repairs on surfaces such as window frames and doors may require the whole item to be repainted to avoid slight colour differences between the existing finish and adjoining repair areas.