Overview

Little Greene Intelligent Eggshell is a durable, water-based paint offering an elegant low-sheen finish perfect for interior woodwork, walls and high-moisture areas such as kitchens and bathrooms.

With a subtle sheen, this tough, fully washable paint combines style with practicality. Formulated to resist moisture, stains and everyday wear, it’s ideal for busy homes where durability matters. Intelligent Grip™ technology ensures excellent adhesion to multiple surfaces for an easy application without the need of a primer in most cases. Intelligent Eggshell is suitable for most surfaces including walls, woodwork and can even be used on radiators. Certified child-safe and low-odour, it’s a smart, eco-friendly choice for modern interiors.

• Low-sheen finish: 10–15% sheen
• Fully washable, scrub-resistant & easy-clean
• Moisture & stain-resistant – perfect for kitchens & bathrooms
• Self-priming with Intelligent Grip™ technology
• Certified Child-Safe & environmentally friendly
• Available in all Little Greene colours

Tinted Colour Information

Preparation

Ensure the surface is clean, dry and free from dirt and grease.

Remove all imperfections and repair defects to achieve a smooth, sound surface

New Wood:

• Seal knots in softwoods with knotting compound to prevent staining.
• Resinous hardwoods require cleaning.
• Ensure timber moisture is below 15%. Do not paint damp wood.
• Green oak must be weathered at least 6 months before painting.

Metals:

• Clean new metal (ferrous or non-ferrous) to remove rust.
• Bare or corroded iron/steel should receive 2 coats of Little Greene Intelligent ASP.

Previously Painted Surfaces:

• Remove loose or flaking paint and degrease with a suitable detergent (e.g. sugar soap), then rinse with clean water.
• Sand with medium-grade paper to create a smooth, keyed surface, feathering edges where paint has been removed.
• Repair and sand as needed.
• High-sheen surfaces should be fully sanded to provide a key. Old matt paint exposed to high humidity may require a priming coat thinned 5–25% (v/v) with water.

Plastics:

• Clean and lightly abrade surfaces to improve adhesion and durability.

New Plaster Walls:

• Allow skim plaster to dry for at least 4 weeks (6 months for full-depth plaster).
• Apply a primer coat of the paint thinned 5–25% (v/v) with clean water, depending on surface porosity.
• Cut in using the same dilution.
• Finish with two full coats.

This product is not recommended for painting lime or other natural plasters.

Existing Plaster Walls:

• Lightly wash to remove dust or laitance.
• Apply a primer coat of the paint thinned 5–25% (v/v) with clean water.
• Finish with at least two full coats.

This product is not recommended for painting previously painted lime or other natural plaster.

Always follow manufacturer's instructions found on the packaging

Application

Always test a small area of the surface to be painted to ensure you are happy with the finished results

• Stir thoroughly before use.
• Lightly sand between coats to remove dust and imperfections for a smooth, professional finish.
• Do not apply below 8°C, or externally if rain or frost is expected during application or drying.

For brush application:

• Use a high-quality synthetic brush suited to the project. Condition new brushes by washing and drying with a lint-free cloth.
• Avoid dipping the brush too deep or overloading with paint.
• Apply in even strokes, maintaining a wet edge.
• Keep final strokes in one direction and avoid re-working once paint starts to dry to prevent lap marks.
• For intricate work or in warm/dry conditions, extend open time by adding 10–15% (v/v) clean water.

For roller application:

• Use a short-nap wool blend sleeve for smooth surfaces; increase nap for textured areas.
• Maintain a wet edge and consistent stroke direction. Do not over-roll drying paint to prevent lap marks.
• Add 10–15% (v/v) clean water in hot or fast-drying conditions.

For sprayer application:

• Conventional: Thin up to 40% (v/v) water. Tip: 1.60–2.00 mm (62–78 thou). Air pressure: 0.28–0.41 MPa (40–60 psi).
• Airless: Thin up to 20% (v/v) water. Tip: 0.28–0.54 mm (11–21 thou). Pressure: 12.6–19.6 MPa (1800–2800 psi).

Always follow manufacturer's instructions found on the packaging

Aftercare & Storage

Storage: Keep unused paint in a cool, dry, frost-free place away from sunlight. Replace lids securely after use. When unopened and stored correctly, the product remains stable for at least 2 years.

Cleaning: For light dirt, gently wipe with a damp sponge or lint-free cloth using a lukewarm solution of mild washing-up liquid. Repeat as needed. Remove DIY dust by vacuuming, using a soft brush attachment to avoid marking nearby surfaces. Make sure radiators are at room temperature before cleaning. Cleaning while hot can cause uneven or patchy polishing.

Care: Avoid placing heavy objects on painted surfaces for one week. Consider applying suitable beeswax polish to high-use areas such as bookshelves to reduce long-term marking.

Repair: Lightly rub down the area, apply suitable primer to any exposed surface, then repaint the whole section with one or two coats as needed. Please note that spot repairs may not match the original finish.