Overview

Johnstone’s Trade UltraLast Matt is a performance, water-based paint designed for high-traffic areas, commercial spaces and public buildings. With its advanced formula, it offers outstanding stain resistance and can be easily cleaned, helping walls stay fresher for longer even in the most demanding spaces. The scuff-resistant durable matt finish not only resists everyday wear and tear but also delivers a smooth, professional look with a modern matt finish. Quick drying and formulated with very low VOC, UltraLast Matt reduces impact on indoor air quality, making it an excellent choice for demanding environments where minimal disruption is required.

Stain resistant & easy to clean
Long-lasting finish - requires less frequent maintenace
Ideal for high footfall areas
Ideal for commercial & public buildings
Very minimal VOC

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Jonhstone's Trade tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

Area	Interior
Recommended Use	Walls & Ceilings: use on previously coated walls & ceilings, as well as new or old dry plaster, dry lining (plaster boards) brick, block, concrete, cement render, primed metal & timber.
Base	Water-Based
Coverage	Up to 15m² per litre
Drying Time	Touch Dry: 1-2 Hours
Re-Coat Time	4 Hours
Application Method	Brush, Roller or Sprayer
VOC Levels	Minimal
Clean Up	Remove as much product as possible from the equipment before cleaning with water

Preparation

Ensure the surface is clean, dry and free from dirt and grease.

Remove any loose or flaking material.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.

Application

Always test a small area of the surface to be painted to ensure you are happy with the finished results

Stir thoroughly before use to ensure the paint is completely mixed.
Johnstone's Trade UltraLast Matt can be applied by brush, roller or sprayer. On smooth surfaces it is recommended to use a short pile roller. On smooth and slight textured, a medium pile is recommended.
Apply two full coats, allowing 2-4 hours before applying the second coat.
For bare or porous surfaces add a mist coat, primer, or thinning ratios if required.
Ensure good ventilation during application and drying.
If using more than one can of the same colour, intermix prior to use to ensure colour consistency.
Airless spray application: undiluted, spray @ 2000-2500 PSI with 0.013”-0.017” tip.
Additional coats may be required with certain colours, or attempting a wide colour change.

Always follow manufacturer's instructions found on the tin