Overview

Give your kitchen or bathroom a refresh with Revive Tile Paint. An easy to use paint that works wonders to transform tired and dated ceramic tiles at a fraction of the cost of replacing them. You can completely revive a whole bathroom or kitchen, or, or just add a dash of colour to your kitchen splashbacks. It dries to a gloss finish and can be applied directly onto tiles with no need for a separate primer or undercoat, making it quicker, easier and cheaper than ever to give your kitchen or bathroom a makeover.

Touch dry in 2 hours
No need for a primer or undercoat
Low odour

Area	Interior
Recommended Use	Kitchen tiles, bathroom tiles
Base	Water-Based
Coverage	up to 12m² per litre
Drying Time	Touch dry in 2 hours
Recommended Coats	2 coats
Application Method	Brush
VOC Levels	Low
Clean Up	Remove as much paint as possible from the brush or roller and wash with water

Preparation

Preparation is essential to a good, smooth finish, so it's important to follow the instructions found on the tin.

To ensure the tiles are clean and dry, apply a strong detergent and wipe clean with a damp cloth. Allow to dry thoroughly before painting.
Smooth surfaces should be lightly rubbed with a fine waterproof abrasive paper to provide a key.
If covering a previously painted surface, first remove any flakes or blisters and rub down well with a fine waterproof abrasive paper. Wear a suitable face mask if dry sanding to avoid the inhalation of dust.

Application

We always recommend preforming a test patch to ensure compatibility, ensure to also follow the instructions found on the packaging.

Make sure the room is well ventilated and plenty of air is ciculating during application and drying.
No primer or undercoat are needed. Stir well before use.
Apply evenly with a brush or roller to clean, dry tiles and avoid overspreading.
A gloss roller is recommended for an even finish. Do not apply in temperatures below 10ºC or in damp conditions.
Spraying is not advised.