Overview

Hammerite Barbecue Paint will revitalise your barbecue and make it look new again. It’s formulated to resist temperatures up to 600°C and resist cracking and flaking and specially designed as a heat resistant paint for BBQs. The quick drying formulation can be recoated in as little as 15 minutes so your BBQ can be renovated in one day. Easy to use, this BBQ paint has a handy aerosol spray for even and quick application and there is no need for costly additional products such as primers or undercoats. Available in a lovely matt black finish for a modern look.

• No primer required
• Durable, heat resistant paint for BBQ
• Quick drying for fast renovation
• Easy aerosol spray application

Preparation

Always ensure your BBQ is clean, dry and free from any dust, algae, fungi or moss.

• Ensure the barbeque is cool before and during preparation and paint application.
• Lightly abrade the surface to remove loose paint and rust you use a 120 grit sandpaper or for painted metal in good condition use a 240 grit sandpaper to prepare the surface.
• Remove dirt and grease with Hammerite Brush Cleaner and Thinners, then rinse with clean water and allow to dry.

Application

Before applying the Hammerite Barbecue Paint Aerosol always ensure to test a small area to ensure you are happy with the colour and adhesion.

• Ensure the barbeque is cool and dry before application.
• Do not apply in temperatures below 8˚C or above 25˚C.
• Mask off and cover the surrounding area to protect from overspray.
• For optimum performance store the aerosol at room temperature 2 hours prior to use.
• Shake can vigorously until the agitator ball is heard and then continue to shake for a further 3 minutes.
• Spray in light even strokes from a distance of 15cm to avoid runs.
• When touch dry (around 15minutes) apply a further 2-3 coats, allowing 5 minutes between each coat.
• Allow to dry overnight.
• Burn off all fumes before cooking food.

Note: Always follow the manufacturer instructions found on the can.

Aftercare & Storage