Overview

Dulux Trade Quick Dry Undercoat is a water-based undercoat that delivers excellent opacity. Part 1 of an advanced 2 part water-based, high gloss system, it has been crafted to provide the best top coat finish with Dulux Trade Quick Dry Gloss but is also suitable for interior wood and metal surfaces.

Advanced water-based technology
Designed for use with Dulux Trade Quick Dry Gloss
Excellent opacity
Low odour

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Dulux tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay.

Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

A tinted primer can be used to help obtain the true depth of colour for your top coat or to reduce the amount of coats required when a drastic colour change is occurring. A tinted primer will not necessarily be the same colour as your selected topcoat. It will be tinted towards the topcoat colour and generally lighter in shade. For example if your topcoat is black your primer may be a shade of grey. If you are unsure about when a tinted primer is required please contact us and we can advise further.

Area	Interior
Recommended Use	use with Dulux Trade Quick Dry Gloss. Suitable for all interior wood and metal.
Base	Water-Based
Coverage	Up to 10m2 per litre
Drying Time	Dependent on temperature and humidity
Re-Coat Time	4-5 hours
Recommended Coats	1-2 Coats
Application Method	Brush, Roller or Sprayer
VOC Levels	Medium
Clean Up	Remove as much product as possible from the equipment before cleaning with water

Preparation

Surfaces must be sound, clean, dry and correctly prepared (new surfaces particularly must be fully dry)

Thoroughly rub down previously painted surfaces, using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

Treat any knots in wood with an appropriate knotting solution.

Any surface defects should be filled with an appropriate Polycell Trade Polyfilla.

Water-borne coatings can be sensitive to rubber containing plasticisers such as flexible PVC strips. The paint film may partially dissolve due to these plasticisers and become sticky. It is advisable to replace such flexible strips with those made of EPDM rubber. We recommend that you seek the advice of the manufacturers of the strips regarding this problem.

When applying water-based paints to surfaces previously decorated with a conventional solvent-based paint, very thorough surface preparation will be necessary.

Application

To get the best results, ensure the surfaces to be painted are sound, clean, and dry. It is recommended to test a small area of the surface to be painted to ensure compatibility and that you are happy with the finished results.

Stir thoroughly before use.

Apply 1 or 2 coats of Dulux Trade Quick Dry Undercoat, as required.

Follow with 1 or 2 coats of Dulux Trade Quick Dry Gloss. Where a strong colour change is involved, 2 coats will be required.

Newly painted doors and windows should not be closed (tightly) until the paint is fully dry.

To get the best with the Dulux Trade Quick Dry Undercoat, lightly dampen both a synthetic brush and the surface before application to increase flow out.

Always follow the manufacturer's instructions found on the tin.