Overview

Quick drying Dulux Trade Metalshield Satin is specially formulated for both ferrous and non ferrous metals including railings,, lift shafts, garage doors and emergency exits. Can be overcoated in 4-6 hours. It provides lasting protection against corrosion. Applying Dulux Trade's straightforward, single-pack system: an appropriate Metalshield primer from Dulux Trade + 2 coats of Metalshield Satin will give up to 8 years metal protection.

• 8 years protection when used as directed
• High protection
• Ferrous and non ferrous metals

Note: Not suitable for high traffic areas such as floors and stair treads.

Preparation

For best results, ensure surfaces to be painted are sound, clean and dry. New surfaces particularly must be fully dry and free from all defective or poorly adhering material such as dirt, grease or wax.

• Prime new or bare surfaces with an appropriate Metalshield primer from Dulux Trade such as Metalshield Quick Dry Primer.
• Thoroughly rub down previously painted surfaces, using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth.
• Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

Application

We recommend testing a small area before painting the entire surface to ensure compatibility.

• Apply with a brush or roller only. Do not spray, for health and safety reasons relating to solvent-based paints.
• Apply 1 coat of the appropriate Metalshield Quick Dry Primer followed by 2 coats of Metalshield Satin.
• Where a special process colour is to be used, or where a strong colour change is required, additional coats will be needed.

Always follow the manufacturer's instructions found on the tin

Aftercare & Storage