Skip to product information
Cuprinol Fence Sprayer
$32.59
Sale price
$32.59
Regular price
$45.90
Overview
The Cuprinol Fence Sprayer will treat your garden wood in a fraction of time. It’s a quick and easy way to colour and protect with Cuprinol Sprayable Treatments.
- Breakthrough nozzle technology gives continuous, controllable spray
- Water clean up
- 3 year guarantee
We recommend using the following products in your Cuprinol Fence Sprayer:
- Cuprinol One Coat Sprayable Fence Treatment
- Cuprinol Garden Shades
| Area | Exterior |
| Clean Up | Pour any remaining product back into the original pack. Fill the sprayer with water and rinse through until clear |
Preparation
The majority of the components are assembled however you will need to attach the hose.
- Always ensure all fittings are tight prior to use
- Test sprayer by filling with water pressurising and performing a test spray and ensure there are no leaks
- Always ensure surface to be sprayed is clean and clear of dirt debris and contaminates
Application
Before using the sprayer always test the product on a small area to ensure colour and adhesion. Colours can vary dependant on surface to be treated.
- For best results stand with the sprayer nozzle approximately 30cm (12") from the fence panel and spray one panel at a time
- Start by spraying the edges and any vertical struts before spraying the centre of the fence panel
- Using a slow, sweeping motion, spray horizontally across the panel, turning at the end and overlapping approximately half of the previous pass each time
- Take care not to spray too quickly as this may result in an uneven finish
- Similarly, spraying too slowly will result in excess product being applied causing runs
- Please be aware that coverage may be less on weathered or absorbent wood
- Avoid spraying in windy or damp conditions to get the best results
- Any overspray should be cleaned up immediately
- For a strong colour change more coats may be needed
- If using more than one tin it’s advisable to mix together in a large container or finish in a corner before starting a new can to ensure consistency in colour
Note: Always follow the manufacturer instructions on the box.
Aftercare & Storage
Check all component parts are free of excessive wear and tear, worn parts must not be used.
Check for damage to unit and attachments, if damaged do not use.