Overview

Crown Trade Universal Metal Primer is a high-performance primer designed for use on ferrous and non-ferrous metals, alloys, and suitably prepared galvanised steel. Its rust-inhibiting formula provides excellent adhesion, helping to reduce the risk of corrosion for long-lasting protection. Suitable for both interior and exterior applications, this durable primer ensures a strong foundation for subsequent coatings.

Superior corrosion resistance
Excellent adhesion for lasting performance
Ideal for interior and exterior metalwork
Fast-drying with a recoatable time of 6 hours

Area	Interior & Exterior
Recommended Use	High-quality priming for ferrous and non-ferrous metals, providing excellent adhesion and rust-inhibiting properties.
Base	Solvent Based
Coverage	Up to 12m2 per litre
Drying Time	Touch Dry in 2-3 Hours
Re-Coat Time	6 Hours
Recommended Coats	1-2 Coats
Application Method	Brush
Clean Up	Remove as much product as possible from the equipment before cleaning with white spirit

Preparation

Unpainted Metalwork (Including Galvanised)

Ensure all surfaces are clean, dry, and free from contaminants. Wash with hot water and detergent, changing the water frequently. Rinse thoroughly and allow to dry. Treat galvanised surfaces with Crown Trade Protective Coatings T-Wash until uniformly blackened.

Non-Ferrous Metals

Lightly abrade to a bright (not polished) finish (excluding galvanised surfaces). Rinse thoroughly, remove all residues, and allow to dry.

Ferrous Metals

Remove rust and millscale back to clean metal. Eliminate all residues and prime all bare areas within the same working day.

Previously Painted Surfaces

Remove loose, failing, or suspect paint. Feather edges of sound paint and eliminate all dust and rust. Spot prime bare metal with Crown Trade Universal Metal Primer. Clean sound paint with hot water and detergent, rinsing frequently. Wet abrade to create a key, rinse, and allow to dry before applying the chosen paint system.

Application

Always follow the manufacturer's instructions found on the tin. We recommend to test a small area before painting the entire surface to ensure compatibility