Crown Trade Mid Sheen Vinyl Emulsion Paint - Tinted Colour Match
Crown Trade Mid Sheen Vinyl Emulsion Paint - Tinted Colour Match
Overview
Crown Trade Mid Sheen Vinyl Emulsion is a water-based paint designed for interior walls and ceilings. Offering a mid-sheen finish, it provides good colour retention, good opacity and a quick-drying, wipeable result. BREEAM® and LEED® accredited, it’s a sustainable choice ideal for residential and commercial decorating projects.
- Water-based Mid-sheen finish
- Wipeable
- Quick drying
- Excellent colour retention & opacity
- Ideal for walls & ceilings
- BREEAM® / LEED® accredited
Tinted Colour Information
Tinted paint is custom mixed in house at Next Day Paint using our Crown Trade tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.| Area | Interior |
| Recommended Use | Interior Walls & Ceilings |
| Base | Water-Based |
| Coverage | Up to 14m2 per litre |
| Drying Time | Touch Dry: 1-2 Hours |
| Re-Coat Time | 4 Hours |
| Recommended Coats | 2 Coats |
| Application Method | Brush, Roller or Sprayer |
| VOC Levels | Low |
| Clean Up | Remove as much product as possible from the equipment before cleaning with water |
Preparation
All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
- Porous surfaces should be coated with a ‘mist’ coat of Crown Trade Acrylic Eggshell diluted with 40% clean water by volume. Where clean water is not available, apply one coat of Crown Trade Covermatt Drywall Primer.
- Any areas of surface filling after priming should be touched in with the priming or mist coat diluted as for main areas.
- Powdery surfaces should be primed with one coat of Sandtex Trade Water Based Stabilising Solution.
- Polished or dense surfaces should be primed with Crown Trade PX3 Primer or where a water-based alternative is required Crown Trade PX4 Primer.
New Surfaces
- Remove all loose, failing or suspect paint. Feather edges of sound paint.
- Organic growth must be treated with Sandtex Trade Fungicidal Solution and removed.
- Fill any fixing holes, cracks and shallow surface defects with Sandtex Ready Mixed Filler.
- Patch prime bare, filled and powdery areas as for new surfaces above.
- Wash remaining sound paint with hot water and liquid detergent solution to remove any contaminants, frequently changing the water.
- Any glossy or eggshell surfaces should be wet abraded to provide a key.
- Rinse with clean water to remove all residues.
- Allow to dry.
- If after cleaning any areas are still contaminated with substances likely to cause staining and/or bleeding, patch prime with one coat ofCrown Trade PX4 Primer.
Previously Decorated Surfaces
Application
Always test a small area of the surface to be painted to ensure you are happy with the finished results
- Stir well before and during use.
- Apply 2 coats by brush or roller to an even thickness (use good quality tools – synthetic or bristle brush or short/medium pile roller). For airless spray dilution may be required. For further information follow the spray manufacturer’s guidelines. Maintain a wet edge.
- Always intermix packs for colour consistency. Please check for colour accuracy prior to application. Crown Paints or Next Day Paint is not liable for decorating costs caused as a result of an incorrect colour being applied.
NOTE: Certain colours may require additional coats to give complete obliteration.
Always follow manufacturer's instructions found on the tin
Aftercare & Storage
Between maintenance redecoration, surfaces may be wiped with a warm water and liquid detergent solution to remove surface dirt
Store upright and secure. Store in secure dry conditions inaccessible to children or animals. Containers should be kept closed during storage. Do not store below 5ºC or above 40ºC.