Coo-Var Masonry Stabiliser - Clear
Coo-Var Masonry Stabiliser - Clear
Overview
Coo-Var Masonry Stabiliser is a high-performance binding and sealing solution designed to strengthen and stabilise porous or fragile masonry surfaces. Ideal for use on unstable brick, screed, or plaster, it penetrates deep into the substrate to bind loose particles, reduce surface dust, and create a solid foundation for paint or protective coatings.
- Perfect for both modern and historic buildings.
- Enhanced durability, providing long-term resistance to weathering and wear.
- Water resistance, helping to prevent moisture penetration, efflorescence, and mould growth.
- Preservation benefits, maintaining the structural integrity and visual appeal of aged or historic surfaces.
- Improved surface stability, ensuring a cleaner, more secure base for decoration or repair.
Whether you're restoring old brickwork or preparing fresh plaster, Coo-Var Masonry Stabiliser ensures a stable, long-lasting finish.
| Area | Exterior |
| Recommended Use | Brick, Plaster, Screed |
| Base | Solvent-Based |
| Coverage | 9m² per litre |
| Drying Time |
Touch Dry, 2 hours Hard Dry, 12 hours |
| Re-Coat Time | 12 hours |
| Recommended Coats | As required |
| Application Method | Brush or Roller |
| Clean Up | Remove as much product as possible from the equipment before cleaning following manufacturer's recommendations |
Preparation
Before applying Coo-Var Masonry Stabiliser, proper surface preparation is essential to ensure optimal performance:
- Ensure all surfaces are clean, dry, and free from grease, oil, dust, dirt, and any other contaminants.
- Remove any loose or flaking material using a stiff brush or suitable scraping tool.
- Treat any areas affected by mould or algae with an appropriate fungicidal wash and allow to dry completely.
- Repair any cracks or damage in the substrate prior to application.
- Allow new plaster, render, or masonry to fully cure before applying the stabiliser.
Application
Ensure adequate preperation for best results. Mix thoroughly before use to ensure an even consistency.
- Apply evenly using a brush or roller, ensuring full penetration into porous areas.
- Allow the surface to fully absorb the product. Do not over-apply or allow it to pool.
- Avoid application in damp conditions or if rain is expected before the product has fully dried.
- Apply under conditions that follow normal good painting practice.
- Do not apply if the substrate or ambient temperature is below 7°C or above 30°C.
- In confined or enclosed spaces, ensure adequate ventilation during both application and drying to allow proper curing and to minimise vapour build-up.