Caparol Capatox Biocide Solution - 5 Litres
Caparol Capatox Biocide Solution - 5 Litres
Overview
Caparol Capatox is an aqueous microbiocide solution for the pretreatment and disinfection of surfaces affected by algae, moss, mould and fungus.
Designed for use on both internal and external surfaces, Capatox is applied after the affected area has been thoroughly cleaned and before subsequent coating. It provides a supportive treatment to help prepare contaminated surfaces for further decorating or protective coatings.
Capatox is supplied ready to use and must be applied undiluted by brush. Depending on the roughness and absorbency of the substrate, the approximate coverage is 50-150 ml/m².
- Aqueous microbiocide solution
- For pretreatment of algae, moss, mould and fungus-infested surfaces
- Suitable for internal and external surfaces
- Used after cleaning and before subsequent coatings
- Ready to use - apply undiluted
- Brush application
- Approx. 50-150 ml/m² depending on substrate
| Area | Interior & Exterior |
| Recommended Use | Pretreating cleaned internal and external surfaces affected by algae, moss, mould or fungus before applying subsequent coatings. |
| Application Method | Brush |
| Clean Up | Remove as much product as possible from the equipment before cleaning with water |
Preparation
Interior surfaces: Remove mould by wet cleaning, observing all applicable legal requirements relating to biological and hazardous substances.
Exterior surfaces: Remove algae, moss, mould and fungus deposits by wet blasting, following applicable legal requirements. Mechanically remove any remaining roots from climbing plants, or remove them by flaming where appropriate.
Once the affected surface has been thoroughly cleaned, allow it to dry before applying Capatox.
For professional removal of mould growth indoors, further guidance should be obtained from the relevant authorities.
Application
- Ensure the cleaned surface is dry before application.
- Apply Capatox undiluted using a brush.
- Thoroughly wet the cleaned surface with the product.
- Allow the treated surface to dry thoroughly before applying subsequent coatings.
- Allow approximately 50–150 ml/m², depending on the roughness and absorbency of the substrate.
- After use, clean application tools with water.
Important: Capatox must always be used undiluted and applied by brush. Follow all applicable regulations when carrying out mould, algae, moss or fungus removal.