Caparol Capacryl PU Matt Paint - White
Caparol Capacryl PU Matt Paint - White
Overview
Caparol Capacryl PU Matt is a high-quality water-based polyurethane-acrylic enamel suitable for indoor projects. It can be applied to primed wood and metal, as well as rigid PVC, offering good versatility.
Designed with a non-blocking, low-odour formula, this matt finish applies with ease while standing up to household cleaners and disinfectants for a professional, long-lasting result.
- Low sheen - Matt finish
- Low-odour & non-blocking formula for easy application
- Resistant to most household cleaners & disinfectants
- Safe for children’s toys (DIN EN 71-3 certified)
| Area | Interior |
| Recommended Use |
Interior primed wood component parts, primed metals and unplastizised/rigid PVC. Note: White tints are not recommended for use on heating systems to avoid yellowing. |
| Base | Polyurethane-acrylic dispersion/emulsion |
| Coverage | 8 - 10 m² per litre per coat |
| Drying Time |
Touch dry: 1-2 hours Full dry: 48 hours |
| Re-Coat Time | 10-12 Hours |
| Recommended Coats | As required |
| Application Method | Brush, Roller or Sprayer |
| VOC Levels | Low |
| Clean Up | Clean tool after use with water and wetting agent. It is recommended the wearing of nitrile gloves |
Preparation
Always ensure the substrate is clean, sound, and appropriately prepared before painting. Use suitable primers and intermediate coats for each type of substrate to guarantee adhesion, durability, and an even finish.
Wood / Timber Products
- Interior: Sand and clean the surface. Prime with Capacryl Holz-IsoGrund and apply Capacryl PU-Vorlack as intermediate coat. Finish with Capacryl PU-Matt.
Capacryl Holz-IsoGrund on wood containing water-soluble, discolouring substances (2 coats on knots). Match intermediate coat shade to finishing coat. Red, yellow, or orange tints may require an additional coat for full opacity.
Metal Surfaces
- Iron / Steel (Interior): Derust and clean, then prime with Capalac AllGrund.
- Zinc (Galvanised): Prime with Capacryl Haftprimer
- Aluminium / Copper: Prime with Capacryl Haftprimer.
Rigid PVC (Interior)
- Prime with Capacryl Haftprimer (see BFS Data Sheet No. 22).
Sound Existing Paint Coatings
- Sand the surface, prepare and prime defects according to the substrate, then apply Capacryl Haftprimer.
Intermediate & Finishing Coats
- Always match the intermediate coat to the shade of the finishing coat.
- Test adhesion for powder coatings, coil coatings, or other critical substrates with a trial application.
- Approximate consumption: 100–120 ml/m² per coat; best established by a trial area on site.
Application Conditions
- Minimum temperature for product, substrate, and ambient air: 8 °C.
- Maximum relative humidity: 70%.
- At 20 °C / 65% RH: Dust dry: 1–2 hours, recoatable (by brush): 10–12 hours, completely dry: 48 hours.
Lower temperatures and higher humidity will extend drying times.
Application
For best results always follow the manufacturers instructions.
- Stir the product thoroughly before use.
- Suitable for brush, roller, or spray equipment.
Brush:
- Use a high-quality brush for smooth, even coverage.
Roller:
- For large surfaces, apply with a short-pile textured polyamide (nylon) roller.
- Immediately smooth over with a fine-porous foam roller or high quality brush to achieve an even finish.
By Spray:
- Adjust tool size according to surface area for fast and consistent coverage.
- Airless: 0.008–0.011 inch nozzle, 200 bar pressure.
- Airmix / Aircoat: 0.011–0.013 inch nozzle, 120 bar gun pressure, 2-3 bar air pressure.
- Low Pressure: 1.8–2.2 mm nozzle, ~0.5 bar air pressure, max. 15% dilution.
- High Pressure: 2.0–2.5 mm nozzle, 2–3 bar air pressure, max. 15% dilution.
Tips for Best Results:
Ensure tools and substrate are clean before starting. Work in manageable sections to maintain a wet edge and avoid visible overlap marks. For large areas, maintain smooth, even strokes to prevent streaks and ensure uniform sheen.
Aftercare & Storage
Keep in a cool, but frost-free place.