Caparol AkkordRollspachtel Interior Paste-like Surfacer Filler- 18Kg
Caparol AkkordRollspachtel Interior Paste-like Surfacer Filler- 18Kg
Overview
Caparol AkkordRollspachtel is a ready-to-use lightweight filler designed for fast and professional wall & ceiling preparation.
The paste-like surfacer can be applied with a paint roller and smoothed using a trowel or knife. Lightweight, it can be spread out nearly to the base level, levelling surfaces to Q3 or Q4 quality and is easy to sand or felt, ensuring a smooth finish.
AkkordRollspachtel can also be used for repairing textured plasters, glass fabrics, concrete, plasterboards and more.
With excellent adhesion and crack-free drying (when applied in thick layers), it delivers flawless results while being low odour, solvent-free and flame-retardant.
- Lightweight, ready-to-use filler
- Easy application and levelling
- Levels surfaces to Q3 & Q4 quality standards
- Crack-free drying
- Easy to sand dry or felt wet for smooth finishes
| Area | Interior |
| Drying Time | 12 - 48 Hours |
| Application Method | Roller, trowel or suitable spray equipment |
| Clean Up | Remove as much product as possible from the equipment before cleaning following manufacturer's recommendations |
Preparation
Ensure the surface is clean, dry and free from dirt and grease.
- Apply a suitable priming coat before surfacer application, depending on substrate requirements.
- Roughen glossy, stable existing coatings.
- This product can be applied with a paint roller, stainless smoothing trowel or suitable spray equipment.
- Stir thoroughly before use, then apply either with a standard short pile paint/lambswool roller (13 - 16 mm piles), smoothing trowel or spray equipment and spread evenly. Level the surface directly (in wet condition) with a smoothing trowel or a spreading knife/wiper/squeegee.
- For coating large/seamless surfaces, 2 people are recommended. One craftsman should apply the material and a second craftsman should smooth the surface, wet-on-wet.
- Allow to dry, then pre-wet and use a felt float or sand in dry conditions.
- For optimal application, a temperature of +10 °C is required.
Application
Always test a small area of the surface to be treated to ensure compatibility.
Suitable Spray Equipment: AkkordRollspachtel can be applied with plaster spray equipment or powerful airless equipment. When airless guns are used, all filters must be removed. Nozzle size: 0.035” - 0.045” Pressure: approx. 150 - 180 bar. Spray guns with a higher discharge, recommended by the respective manufacturer, can be used as airless guns for an easier surfacer application.
Subsequent Treatment: Thoroughly dry surfaces, levelled with AkkordRollspachtel, can be primed with Caparol HaftGrund or CapaSol and are then coatable/compatible with all suitable Caparol emulsion and latex paints, Sylitol BioInnenfarbe or Capacryl acrylic enamels, plastic compounds or glass fibre wall coverings and wallpapers. Prime with Putzgrund 610 before applying synthetic (organic) plasters.
Always follow manufacturer's instructions found on the tin