{"product_id":"benjamin-moore-advance-interior-paint-satin-1-gallon-378l-whites","title":"Benjamin Moore Advance Interior Paint Satin - 1 Gallon (3.78L) - Whites","description":"\u003ch1\u003eOverview\u003c\/h1\u003e \u003cp\u003eBenjamin Moore Advance Interior Paint is a water-based alkyd enamel providing an ultra tough coating for wood and metal.\nOffering the durability and smooth application of oil-based paints with the convenience of a water-based formula, it is particularly suited for woodwork projects requiring brush application. Ideal for doors, cabinets, trim, and furniture, it also adheres to primed or previously painted surfaces like wallboard, plaster, masonry, wood, and metal. With excellent coverage and flawless, brush mark-free finish, this premium paint is available in over 3,500 colours.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSatin finish\u003c\/li\u003e\n\u003cli\u003eExcellent for interior woodwork projects such as cabinets, trims, skirting \u0026amp; doors\u003c\/li\u003e\n\u003cli\u003eFlows \u0026amp; levels like traditional solvent-based alkyd for a high-end, smooth finish\u003c\/li\u003e\n\u003cli\u003eMinimal yellowing\u003c\/li\u003e\n\u003cli\u003eCures to a hard, durable finish that resists repeated washing\u003c\/li\u003e\n\u003cli\u003eEasy clean up with soap \u0026amp; water\u003c\/li\u003e\n\u003cli\u003eSpatter resistant\u003c\/li\u003e\n\u003cli\u003e1 Gallon covers around 40-45m2\u003c\/li\u003e \u003cli\u003eBenjamin Moore Sample Pots available\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e\n\u003ctd\u003eArea\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Use\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eBest for woodwork projects, especially those to be applied by brush, where a flawless, furniture-grade finish is required.\u003c\/p\u003e\n\u003cp\u003eIdeal for interior walls, doors, trim, cabinets and ceilings. Also works on primed or previously painted wallboard, plaster, masonry, wood and metal. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eWater-Based\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eUp to 12m2 per litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying Time\u003c\/td\u003e\n\u003ctd\u003eTouch Dry: 4-6 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRe-Coat Time\u003c\/td\u003e\n\u003ctd\u003e16 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Coats\u003c\/td\u003e\n\u003ctd\u003e1-2 Coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Method\u003c\/td\u003e\n\u003ctd\u003eBrush, Roller or Sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC Levels\u003c\/td\u003e\n\u003ctd\u003eLow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClean Up\u003c\/td\u003e\n\u003ctd\u003eRemove as much product as possible from the equipment before cleaning with water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cp\u003eEnsure the surface is clean, dry, and free of dirt, dust, grease, oil, soap, wax, scaling paint, water soluble materials, and mildew.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew surfaces should be fully primed, and previously painted surfaces may be primed or spot primed as necessary.\u003c\/li\u003e\n\u003cli\u003eRemove any peeling or scaling paint and sand these areas to feather edges smooth with adjacent surfaces. Glossy areas should be dulled. Drywall surfaces must be free of sanding dust.\u003c\/li\u003e\n\u003cli\u003eNew plaster or masonry surfaces must be allowed to cure (30 days) before applying base coat. Cured plaster should be hard, have a slight sheen and maximum pH of 10; soft, porous or powdery plaster indicates improper cure. Never sand a plaster surface; knife off any protrusions and prime plaster before and after applying patching compound.\u003c\/li\u003e\n\u003cli\u003ePoured or pre-cast concrete with a very smooth surface should be etched or abraded to promote adhesion after removing all form release agents and curing compounds.\u003c\/li\u003e\n\u003cli\u003eRemove any powder or loose particles before priming. Wood substrates must be thoroughly dry.\u003c\/li\u003e\n\u003cli\u003eDifficult Substrates: Benjamin Moore offers a variety of specialty primers for use over difficult substrates such as plaster, bleeding woods, grease stains, crayon markings, hard glossy surfaces, galvanised metal or other substrates where paint adhesion or stain suppression is a particular problem. See Datasheet for more informations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003cp\u003eAlways test a small area of the surface to be painted to ensure you are happy with the finished results\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not apply when air and surface temperatures are below 10 °C (50 °F)\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before use\u003c\/li\u003e\n\u003cli\u003eApply one or two coats\u003c\/li\u003e\n\u003cli\u003eNew surfaces should be fully primed, and previously painted surfaces may be primed or spot primed as necessary. \u003c\/li\u003e\n\u003cli\u003eFor best results, use a Benjamin Moore Professional custom-blended nylon\/polyester brush, Benjamin Moore Professional roller, or a similar product\u003c\/li\u003e\n\u003cli\u003eThis product can also be sprayed. Spray, Airless: Pressure \/ 1,500 – 2,500 PSI Tip \/ 0.013 – 0.017. Spray, HVLP: Fluid Pressure — 20 PSI; Tip — 1.8 Tip.\u003c\/li\u003e\n\u003cli\u003eThinning is unnecessary, but if required to obtain desired application properties, a small amount of clean water may be added. Never add other paints or solvents. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlways follow manufacturer's instructions found on the tin\u003c\/p\u003e\n\u003cp\u003eNote: Certain custom colours may require a Deep Base Primer tinted to a special prescription formula to achieve the desired colour.\u003c\/p\u003e\n\u003cp\u003eNote: Although Advance yellows less than conventional alkyds, a slight amount of yellowing may occur. This effect is accelerated in dark or poorly ventilated areas and is more visible in lighter colours. \u003c\/p\u003e","brand":"Benjamin Moore","offers":[{"title":"White","offer_id":57448306737318,"sku":"tfj1789763487624","price":80.02,"currency_code":"USD","in_stock":true},{"title":"Super White","offer_id":57448306770086,"sku":"qxt1789763487625","price":88.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/7649\/4758\/files\/benjamin-moore-advance-interior-paint-satin---1-gallon-378l---whites_1.jpg?v=1789763492","url":"https:\/\/printmotifwear.shop\/products\/benjamin-moore-advance-interior-paint-satin-1-gallon-378l-whites","provider":"My Store","version":"1.0","type":"link"}