Overview

Bedec Acrylic Floor Paint is a high-performance, self-crosslinking acrylic coating designed for both commercial and domestic floors. Formulated with high-build modified acrylic resins, it delivers a tough, durable finish with excellent adhesion, abrasion resistance, and long-lasting colour retention. The built-in micro-aggregate provides slip-resistant properties, giving added safety in high-traffic areas.

Suitable for a wide variety of substrates, including wood, concrete, cement rendering, stone, MDF, chipboard, and most types of plastic. Clear floor paint is not slip-resistant and should be used accordingly.

Quick-drying and low-odour, Bedec Acrylic Floor Paint is ideal for interiors where a durable, professional-quality floor finish is required. Its self-priming formula ensures easy application and reliable performance for both residential and commercial settings.

• Satin finish
• Slip-resistant micro-aggregate for safer surfaces
• Durable and hard-wearing - excellent abrasion resistance
• Long-lasting colour retention for commercial and domestic floors
• Self-priming, quick-drying, and low-odour
• Suitable for wood, concrete, cement, stone, MDF, chipboard, and most plastics

Tinted Colour Information

Preparation

Proper preparation is essential for a durable, professional finish with Bedec Floor Paint. Follow these steps for best results:

• Clean & dry surfaces: Ensure all areas are free from dust, dirt, grease, and wax.
• Remove loose coatings: Strip away any flaking or defective paint.
• Mould, algae, or fungal growth: Remove growths and treat affected areas with a suitable fungicidal wash.
• Glossy surfaces: Lightly abrade smooth or shiny areas to provide a key for adhesion.
• Metal surfaces: Bare steel should be clean, rust-free, and dust-free before applying Phosphate Grey or Red Oxide.
• Wood surfaces:
  • New planed, finished, or PSE timber: lightly sand to open the grain for maximum penetration.
  • Where extractive discolouration is possible, treat with Bedec Stain Block and test a small area first. Knots should also be treated (knotting solution not recommended).
• Porous substrates: For new wood, cement render, or similar, thin the first coat with 30–40% clean water to improve absorption.
• Concrete surfaces: Ensure any laitance is washed off. Not recommended for power-floated concrete unless scarified to improve adhesion.

Application

Always test a small, inconspicuous area first to ensure you are satisfied with the colour and finish. Keep in mind that colours may appear differently on screens.

• Proper preparation is essential - skipping these steps can affect adhesion and the final results.
• Stir the paint thoroughly before use and apply with a brush or roller.
• For new wood, cement render, or other porous surfaces, thin the first coat with 30-40% clean water for better absorption.
• Apply two full coats, allowing at least 4 hours drying time between coats.
• For areas subject to heavy wear, a third coat is recommended for extra durability.
• Allow 16-24 hours drying time before using the floor.

Note: Coverage may vary depending on the texture and porosity of the surface.

Aftercare & Storage

Ensure to clean the rim of the paint tin and firmly replace the lid before storing in a cool, dry area that will protect the paint from low temperatures. Do not store it in a shed or by hanging on a hook.

Do not clean the surface with strong alkaline cleaners as this may deteriorate the surface. Clean by mopping lightly with a weak detergent solution and rinse with clean water.