Barrettine Wood Preserver
Barrettine Wood Preserver
Overview
Barrettine Wood Preserver is a low odour, deep penetrating oil based wood preservative protecting against wet rot, wood destroying fungi, wood discolouring fungi and wood-boring insects. The semi transparent matt / satin finish shows the natural beauty of the wood texture. Apply to pressure-treated, treated or untreated wood. Suitable for rough, sawn or smooth timber and does not need over sealing. For outdoor use and also on window frames, external doors and frames, structural timbers in unoccupied areas such as floor joists.
- Semi transparent matt / satin finish
- No topcoat needed
- UV fade resistant colour wood stains / pigments
- Long lasting protection
- Water repellant
- Approved under COPR/BPR
- Harmless to plants and pets when dry
| Area | Exterior |
| Recommended Use | Joinery, doors, windows, facades, carports, shutters, summer houses, gates and balcony railings. Wood resting on the ground only |
| Base | Oil-Based |
| Coverage | Up to 6m² per litre |
| Drying Time | 12 Hours under normal conditions. |
| Re-Coat Time | 6-12 Hours |
| Recommended Coats | 2-3 Coats |
| Application Method | Brush, Roller, Airless Spray |
| VOC Levels | High |
| Clean Up | Remove as much paint as possible from the equipment before cleaning with brush cleaner |
Preparation
Before applying Barrettine Wood Preserver, make sure that the wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish. Remove coatings and sand down as necessary.
Application
The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour. Always follow the manufacturer's instructions found on the tin.
- Barrettine Wood Preserver can be sprayed using an airless sprayer such as a Wagner or Graco ideally using a minimum 1mm flat fan tip nozzle (9 – 11 thou tip). Clean the sprayer thoroughly after application with white spirit and then oil to protect the tip and moving parts, as per manufacturer’s instructions. This product cannot be sprayed with a traditional pump action garden sprayer
- Do not apply in damp conditions or if rain is imminent.
- Apply thinly and evenly using a synthetic brush designed for solvent-borne products, in the direction of the wood grain.
- Ensure end grain is thoroughly treated along with cut and drilled areas
- 2 coats minimum are recommended.
- Low temperatures, increased humidity and composition of some wood types may increase drying time. Multiple applications will provide a darker finish and smoother wood will increase the sheen.