Annie Sloan Metallic Paint - 118ml - Traditional Gold
Annie Sloan Metallic Paint - 118ml - Traditional Gold
Overview
A little opulence goes a long way. Annie Sloan Metallic Paint is a water-based decorative paint that brings warm, lustrous radiance to furniture and walls, currently available in Traditional Gold, a muted, antique shade inspired by some of the world's most iconic interiors. Warm and considered rather than brash or bright, it's a gold that works beautifully with your interiors rather than competing with them.
Apply one thin coat for a translucent shimmer that lets the surface beneath show through, or build to two coats for a fully opaque, lustrous finish. Two simple steps, two completely different results, both beautiful. Built-in protection means no Wax or Lacquer is needed in most cases, and each 118ml tin covers approximately 0.9 square metres, perfect for accent work, mouldings, furniture details and statement pieces. For indoor use only.
- Lustrous satin-sheen finish - warm, radiant metallic effect on furniture and walls
- One coat or two - translucent shimmer or fully opaque lustrous shine
- Traditional Gold shade - muted, antique gold with vintage charm
- Built-in protection - no Wax or Lacquer needed in most cases
- Water-based and easy to use - apply with a Flat Brush or Small Sponge Roller
| Area | Interior |
| Recommended Use | Furniture, walls, accent work, mouldings and detail work |
| Base | Water-Based |
| Coverage | Each 118ml tin covers approximately 0.9 square metres |
| Drying Time | 3-4 hours |
| Re-Coat Time | 3-4 hours |
| Recommended Coats | 1-2 coats |
| Application Method | Brush or Sponge Roller |
| VOC Levels | Low |
| Clean Up | Remove as much product as possible from the equipment before cleaning with water |
Application
Stir well before use to ensure the metallic particles are fully dispersed. Always perform a patch test on several areas before beginning your project. Ensure the surface is completely dry and dust-free before applying. If applying over Chalk Paint™, ensure it is fully dry before proceeding.
- Apply using an Annie Sloan Flat Brush or Small Sponge Roller for the best, most even results.
- For a translucent shimmer, apply one thin, even coat and allow to dry fully.
- For a lustrous opaque finish, apply a second coat, allow 3 to 4 hours for the first coat to fully dry before recoating.
- No Chalk Paint™ Wax or Lacquer is required to seal, Metallic Paint has built-in protection.
- For high-traffic areas or if the paint shows signs of wear over time, reapply and finish with a coat of Annie Sloan Chalk Paint™ Lacquer for added durability.
- Not suitable for exterior use.
Aftercare & Storage
To maintain the finish, wipe clean with a damp cloth using mild detergent, avoid harsh chemicals Reapply as and when necessary to refresh the metallic finish.